Fabricar: Adaptec Tamaño del archivo: 181.2 kb Nombre del archivo: Idioma del manual:

Enlace gratuito para este manual disponible en la parte inferior de la página

Including information about the most recent rebuild, synchronization, logical-drive migration, and compaction/expansion. The information includes the type of operation, status, logical drive number, logical drive size, and percentage of the operation completed. Note: 1 GETSTATUS reports currently active operations for both ARCCONF commands and commands issued from the Adaptec Storage Manager. 2 GETSTATUS reports verify, clear, initialize, and secure erase operations on physical devices. 3 GETSTATUS only reports active operations. It does not display information if the operation is completed. Syntax ARCCONF GETSTATUS Parameters Controller# is the controller number Example ARCCONF GETSTATUS 1 Chapter 2: Using the Command Line Utility . 16 arcconf getversion Lists version information for all controllers or a specific controller’s software components, including information about the BIOS, driver, firmware currently running, and firmware that will run after a reboot. Note: The firmware version that will run after a reboot is called the “staged” firmware. Syntax ARCCONF GETVERSION (use this for information on all controllers) ARCCONF GETVERSION (use this for information on a specific controller) Parameters Controller# is the controller number Example ARCCONF GETVERSION arcconf identify Identifies a physical or logical device by blinking its LEDs. Syntax ARCCONF IDENTIFY LOGICALDRIVE ARCCONF IDENTIFY DEVICE Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive to be identified Channel# is the channel number for the device to be identified Device# is the device number for the device to be identified Example ARCCONF IDENTIFY 1 DEVICE 0 0 ARCCONF IDENTIFY 1 ALL arcconf key Loads a feature key onto an Adaptec controller. Syntax ARCCONF KEY SET Parameters Controller# is the controller number Key# is the key number provided by Adaptec Example ARCCONF KEY 1 SET ABCD EFGH IJKL MNOP QRST UVWX Chapter 2: Using the Command Line Utility . 17 arcconf modify Morphs a logical device from one raid level to another (RAID Level Migration). Expands a logical device from original to one with larger capacity (Online Capacity Expansion). Can be used to make mirrored sets. Syntax MODIFY FROM TO [Options] [CHANNEL# DRIVE#] [noprompt] Parameters Controller# is the controller number From indicates that the logical drive to be modified will follow LogicalDrive# is the logical drive number TO indicates that the modifications will follow Options: . Stripesize—indicates the stripe size in KB. Options are 16, 32, 64, 128, 256, 512, and 1024. the default is 256KB. . init_priority—is the priority level of the modification. Options are low, med, and high. . Legs— is the number of subarray...

Otros modelos de este manual:
Otros componentes - Adaptec Serial ATA II RAID 1220SA (181.2 kb)
Otros componentes - Adaptec RAID 4805SAS (181.2 kb)
Otros componentes - Adaptec RAID 4800SAS (181.2 kb)

Descargar ahora

Introduzca dos números de la imagen: