Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Some medications and cosmetics increase the sensitivity of the skin. It is therefore highly important: - -that the tanning distance (the distance between the appliance and your face) is 10 cm; -that you do not exceed the maximum number of tanning hours per year (i.e. 16 hours or 960 minutes); -that you always wear the goggles provided while tanning. tanning sessions: how often and how long? , that you follow the instructions in chapter ‘Impor tant’ and section ‘Tanning sessions: how often and how long?’; ,,, , , , , Do not take more than one tanning session per day, over a period of five to ten daysAllow an interval of at least 48 hours between the first and the second session. After this 5- to 10-day course, we advise you to give your skin a rest for a while. Approximately one month after a course, your skin will have lost much of its tan.You can then start a new course. If you want to keep your tan, do not stop tanning after the course, but continue taking one or two tanning sessions a week. Whether you choose to stop tanning for a while or whether you continue tanning on a lower frequency, always keep in mind that you must not exceed the maximum number of tanning hours. For this appliance the maximum is 16 tanning hours (= 960 minutes) a year. Example Suppose you are taking a 10-day tanning course, consisting of a 6-minute session on the first day and a 15-minute session on each of the following nine days. The entire course will then last (1 x 6 minutes) + (9 x 15 minutes) = 141 minutes. In one year you can take 6 of these courses, as 6 x 141 minutes = 846 minutes. table As is shown in the table, the first session of a tanning course should always last 6 minutes, irrespective of the sensitivity of the skin. If you think that the sessions are too long for you (e.g. if the skin gets taut and tender after the session), we advise you to reduce the length of the sessions by e.g. 5 minutes. Note: For a beautiful, even tan, turn your face to the left and right from time to time during the session so that the sides of the face are better exposed to the tanning light. EngliSH Note: If your skin feels slightly taut after tanning, you can apply a moisturising cream. break of at least 48 hours 2nd session 3rd session 4th session 5th session 6th session 7th session 8th session 9th session Duration of the tanning session inminutes for persons with very sensitive skin for persons with normal sensitive skin for persons with less sensitive skin 1st session 6 break of at least 48 hours 10 10 10 10 10 10 10 10 6 6 break of at least 48 hours 15-20 20-25 15-20 15-20 20-25 15-20 15-20 20-25 15-20 15-20 20-25 15-20 break of at least 48 hours 20-25 20-25 20-25 20-25 10th session 10 15-20 20-25 using the appliance session. Put on the protective goggles supplied. Set the timer to the appropriate tanning time (Fig. ). Position yourself in front of the face tanner. The distance between your face and the tanning lamps should be 10 cm (Fig. ). 4 5 6 1 Place the appliance on a solid, flat and stable surface. The appliance can be placed in two positions: upright and tilted (Fig. 1). , Put the plug in the wall socket. Consult the table in these instructions for use to determine the appropriate duration of the , When the set time has elapsed, the timer will automatically switch off the appliance. 7 Always unplug the appliance after use. 8 Keep track of the overall number of sessions you have had on a piece of paper or by means of the memory knobs. Protective goggles The protective goggles should only be used when tanning with a Philips tanning appliance. They should not be used for other purposes. The protective goggles comply with protection class II according to directive 89/686/EEC. Cleaning Always unplug the appliance and let it cool down before cleaning it. You can clean the outside of the appliance with a damp cloth. Make sure that no water runs , into the appliance. EngliSH 9 Never use scouring pads and abrasive liquids such as scouring agents, petrol or acetone to clean the appliance. 1 Clean the protective goggles with a moist cloth. Replacement The light emitted by the tanning lamps will become less bright in time (i.e. after a few years in case of normal use). When this happens, you will notice a decrease in the tanning capacity of the appliance.You can solve this problem by setting a slightly longer tanning time or by having the tanning lamps replaced. Always have the tanning lamps and starters replaced by a service centre authorised by Philips. Only they have the knowledge and skills required for this job and the original spare parts for your face tanner. Additional or replacement goggles, type HB071, can be ordered under ser vice number 4822 690 80123. Environment The lamps of face tanners contain substances that may pollute the environment.When you , discard the lamps, do not throw them away with the normal household waste, but dispose of them at an official collection point. Do not throw the appliance away with the normal...