Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
These User Instructions are not designed to serve as a training manual for personnel with no previous practical experience with air purifying respirators (APR). Contact 3M OH&ESD Technical Service Department for more information on training programs available. For proper use, see supervisor, or instructions, or call 3M Technical Service CAUTION The headstraps of this respirator contain natural rubber latex which may cause an allergic reaction. This respirator helps reduce exposure to certain airborne contaminants but does not eliminate exposure or the risk of contracting disease or infection. Misuse may result in sickness or death. For proper use, see supervisor or User Instructions, or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414. • This respirator helps reduce exposure to certain airborne contaminants but does not eliminate exposure or the risk of contracting disease or infection. Misuse may result in sickness or death. For proper use, see your supervisor, product packaging or call 3M in U.S.A. at 1-800-243-4630. In Canada call 3M at 1-800-267-4414. • Use only 3M parts with this respirator. • Do not use when airborne concentrations of contaminants exceed the maximum use concentration (MUC)of the respirator. See Quantitative and Qualitative Fit Testing section of these User Instructions. • This respirator must be inspected before each use to ensure it is in proper operating condition. See Inspection Procedure section. • Before you enter a contaminated atmosphere wearing this respirator, you must inspect the respirator, don the respirator according to the instructions provided with the components of the system you are using and complete a User Seal Check. Failure to do so may affect respirator performance and may result in sickness or death. • Before removing the respirator, you must leave the contaminated area and be completely decontaminated by following applicable decontamination protocols. Alternatively, have an individual, who has not been contaminated, assist you with doffing. • Before storing the respirator, be sure that the respirator has been decontaminated per applicable decontamination protocols. If necessary, dispose of the equipment per applicable waste regulations. • Do not connect or use the drinking system in contaminated atmospheres. 2 CAUTION • Cleaning with solvents may degrade some respirator components and reduce respirator effectiveness. See Maintenance and Cleaning section. • Inspect all respirator components before each use to ensure proper operating conditions. • The used cartridge must be disposed of in accordance with all applicable waste regulations. • Avoid overstretching the holes in the universal second skin. To prevent tearing the exhalation valve cover opening of the universal second skin, be careful pulling it over the flanges of the exhalation valve housing. • DS2 is a common agent used in the decontamination of equipment exposed to military chemical warfare agents. DS2 may damage the front and side voicemitters of the mask assembly. When exposed to DS2, rinse voicemitters with clean water. USE INSTRUCTIONS AND LIMITATIONS Important Before use the wearer must read and understand these User Instructions. Keep these instructions for reference. FR-C2A1 is NIOSH approved for chlorine, hydrogen chloride, sulfur dioxide, chloroacetophenone (CN), o-chlorobenzylidene malononitrile (CS) and P100. See 3M™ FR-C2A1 Cartridge User Instructions, Specification section. FR-64 is NIOSH approved for certain organic vapors, sulfur dioxide, chlorine, hydrogen chloride, chlorine dioxide, hydrogen fluoride, ammonia, methylamine, formaldehyde, hydrogen sulfide (escape only), phosphine , chloroacetophenone (CN), o-chlorobenzylidene malononitrile (CS) and as a P100 particulate filter. See 3M™ FR-64 Cartridge User Instructions, Specification section. Note, the FR-C2A1 Cartridge: – Meets canister requirements for protection against CS, CN. – Meets cartridge requirements for chlorine, hydrogen chloride and sulfur dioxide. – Filter meets 42 CFR 84 P100 requirements. – Meets the gas testing criteria of U.S. Military Specification MIL-C-51560(EA) and EA-C-1704. – Is not NIOSH evaluated for any other gases or vapors. Note, the FR-64 Cartridge: -Meets canister requirements for protection against H2S(escape only), Phosphine, CS, and CN. -Meets cartridge requirements for certain organic vapors, sulfur dioxide, chlorine, hydrogen chloride, chlorine dioxide, hydrogen fluoride, ammonia, methylamine and formaldehyde. -Filter meets 42 CFR 84 P100 requirements. -Meets certain gas testing criteria of U.S. Military Specification MIL-C-51560 (EA), EA-DTL=1704A, NATO triptych AC/225 (Panel VII D/103 and QSTAG 1009. Use For 3M recommends the use of this product to help reduce the respiratory exposure of wearers to certain chemical and biological warfare agents when used in accordance with all use and limitation instructions and applicable safety and health regulations. 3 Do No...