Note: The hoist can be mounted a beam trolley if the capacity of the trolley system is at least twice the maximum load capacity of the hoist. 3. Position the load directly under the ratchet hoist. Always connect the ratchet hoist lifting hook to a separate lifting device attached to the load, such as straps, chains, or eye bolt. DO NOT wrap the hoist lifting chain and hook around the load in any way. If you do, the dynamic loads could exceed the capacity of the hoist, causing it to fail and drop

2 Mineral Spirits.....................As Needed Stiff-Bristled Brush .......................... 1 Shop Rags ..........................As Needed Multi-Purpose Gear Grease......As Needed To grease the hoist gears: 1. Lay the hoist housing on a flat working surface with the brake cover facing down. 2. Remove the three lock nuts that secure the gear cover, then remove the cover (see Figure 2). Figure 2. Gears exposed. Lock Nuts Splined Gear Gear Cover Disc Gears 3. Remove the two disc gears from the