Votos - 5, Puntuación media: 4.4 ( )

Fabricar: BOXLIGHT Tamaño del archivo: 810.6 kb Nombre del archivo: manual-t25.pdf Idioma del manual:

correctly. Make sure the USB port is USB 2.0... Try a different USB 2.0 port or another computer... Check the power led indicator is.. ON. Try connecting to USB port of the Notebook directly instead .. of through the hub. Unplug all other USB devices from the system... Make sure to restart your computer after thedriver .. installation. Unplug the device and re-insert it... The projected image is too dark Use the projector in a darker environment... Increase the brightness by using the AC power adapter... Decrease the size of projected image... The projected image is dim Adjust the focus. Please refer to “Adjusting the Projected .. Image”. Check if the lens is dirty... Can not click Pico Projector application If you have problems during the boot up process, start .. your computer in Safe Mode and un-install the driver. The surface temperature of projector ascended Because of the high-luminance LED equipped, it is normal .. for this projector to generate heat in long-time use. This will not affect the performance of projector. The projector case will help to dissipate heat so that its surface temperature will ascend. Always keep the ventilation slots free of dirt or obstructions and operate the projector in a properly ventilated environment. Warranty Please note the supplied warranty card to learn more about warranty conditions, the Aiptek Service, and contact information for your country. ...

Descargar ahora

Introduzca dos números de la imagen: