Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
Focus Message disappears after 4 seconds. KEYSTONE ADJUSTMENT If a projected picture has keystone distortion, correct image with KEYSTONE adjustment. 1 1 Press KEYSTONE / button on Remote Control Unit or select Keystone on SETTING menu. (Refer to page 35.) Keystone dialog box appears. 2 2 Correct keystone distortion by pressing KEYSTONE / button or POINT UP/DOWN button(s). Press KEYSTONE button or POINT UP button to reduce the upper part of image, and press KEYSTONE button or POINT DOWN button to reduce the lower part. Reduce the upper width with KEY STONE button Reduce the lower width with KEY STONE button or POINT UP button. or POINT DOWN button. PICTURE FREEZE FUNCTION Press FREEZE button on Remote Control Unit to freeze the picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button. BASIC OPERATION NO SHOW FUNCTION Press NO SHOW button on Remote Control Unit to black out the image. To restore to normal, press NO SHOW button again or press any other button. No show Message disappears after 4 seconds. P-TIMER FUNCTION Press P-TIMER button on Remote Control unit. The timer display “00 : 00” appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59). To stop P-TIMER display, press P-TIMER button. And then, press PTIMER button again to cancel P-TIMER function. SOUND ADJUSTMENT Indicates roughly level of DIRECT OPERATION volume. Volume Press VOLUME (+/–) button(s) on Top Control or on Remote Control Unit to adjust volume. Volume dialog box appears on the screen for a few seconds. (+) button to increase volume, and (–) button for decreasing. Mute Press MUTE button on Remote Control Unit to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/–) button(s). MENU OPERATION 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SOUND Menu icon. 2 2 Press POINT DOWN button to move a red frame pointer to the item that you want to select, and then press SELECT button. Volume To increase volume, press POINT RIGHT button, and press POINT LEFT button for decreasing. Press MUTE button to set Mute function On or Off. The display disappears after 4 seconds. SOUND MENU Indicates roughly level of volume. SOUND Menu icon Close SOUND Menu. Mute Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box display is changed to “On” and sound is cut off. To restore sound to its previous level, press POINT LEFT/RIGHT button(s) again. COMPUTER INPUT SELECTING INPUT SOURCE INPUT button DIRECT OPERATION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. Computer Video If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). MENU OPERATION INPUT MENU 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 2 2 Press POINT DOWN button to move a red arrow pointer to Computer and then press SELECT button. Source Select Menu will appear. 3 3 Move a pointer to either RGB (Digital) or RGB (Analog) and then press SELECT button. When your computer is connected to COMPUTER RGB (Digital) INPUT (DIGITAL) terminal, select RGB (Digital). Move a pointer to RGB (Digital) or RGB (Analog) When your computer is connected to COMPUTER and press SELECT button. RGB (Analog) INPUT (ANALOG) terminal, select RGB (Analog). Move a pointer (red arrow) to Computer and press SELECT button. Computer INPUT Menu icon Source Select Menu SELECTING COMPUTER SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 23). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.) Note : Projector may display one of the following messages. When projector cannot recognize connected signal as PC Auto system provided in this projector, Auto PC Adjustment function operates to adjust projector and the message “Auto” is displayed on SYSTEM Menu icon. (Refer to P24.) When image is not provided properly, manual adjustment is required. (Refer to P25 and 26.) There is no signal input from computer. Make sure the –––– connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 40.) SELECT COMPUTER SYSTEM MANUALLY This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually. 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to PC SYSTEM Menu icon. 2 2 Press POINT DOWN button to move a red arrow pointer to the system that you want to set, and then press SELECT button. PC SYSTEM MENU SYSTEM Menu icon Displays system being selected. PC SYSTEM MENU SYSTEM Menu icon Displays system being sele...