Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Especially the consecutive use of the projector for more than 10 hours, or the frequent switching on or off may greatly affect on the lamp life. Screen • Do not apply any volatile substances which may cause discoloration to the screen, and do not let it become dirty or damaged. Optical components • If you use the projector consecutively 6 hours every day, the optical components may need to be replaced in less than 1 year. Accessories Make sure the following accessories are provided with your projector. Remote control for PT-FW100NTU (x1) N2QAYB000158 d)/i o O AUTO SETUP INPUT L SELECT '-' COMPUTER NETWORK VIDEO □ IZB □□ FREEZE ^““^SHUTTER □ COMPUTER I I DEFAULT ^4™ INDEX-'«™ □ (3 MULTI-LIVE DOUBLE-WINDOW □ □ DIGITAL ZOOM VOLUME AA batteries for Remote control (x2) Power cord (x1) K2CM3DH00015 Safety cable TTRA0141 Attachment screw (x1) Safety cable (x1) CD-ROM (x1) TQBH9009 English - 9 Important Information Preparation Read this first Minimum required setting screen When you start the projection for the first time, the minimum required setting screen for projection will be displayed. ■ LANGUAGE Select the required language setting. LANGUAGE [Г POLSKI Г CESTINA Г MAGYAR Г РУССКИЙ Г Ъш_ Г НФ8н PLEASE SELECT LANGUAGE Press F ▼ 1 ► buttons of the Remote control or Control panel on the projector to highlight the required language, and press ENTER to proceed to the next setting. ■ OPTION Select the current projection method, screen size and fan speed setting. If you need return to the previous setting, press the RETURTN button. INSTALLATION Press 1 ► buttons of the Remote control or Control panel on the projector to select the required installation method. Press ▼ to proceed to the HIGHLAND setting. FRONT/DESK Setting on a desk/floor and projecting from front FRONT/CEILING Mounting in the ceiling and projecting from front REAR/DESK Setting on a desk/floor and projecting from rear REAR/CEILING Mounting in the ceiling and projecting from rear SCREEN FORMAT Select the required screen format by pressing 1 ► . • 16:10 When project on a 16:10 or 4:3 screen. • 16:9 When project on a 16:9 screen. HIGHLAND If you use the projector at high elevation, the HIGHLAND setting need to be ON to set the fan speed high. Press 1 ► to select the required option. If you need to return to the INSTALLATION, press ▲. • OFF The fan speed is low. • ON The fan speed is high. NOTE: • At 1 400 m (4 593 ft) above sea level, the setting must be ON. • The loudness of fan noise depends on the HIGHLAND setting. DEUTSCH FRANÇAIS ~ ESPAÑOL ITALIANO ~ PORTUGUÉS SVENSKA ~ NORSK ~ DANSK ENGLIGH Press the ENTER button to start the projection. • Once you finish the minimum requirement setting, it will not be displayed again unless the projector is initialized. See “INITIALIZE ALL” on page 36. • You can change the settings from the MAIN MENU. See “Menu Navigation” on page 27. English -10 About Your Projector Remote control POWER button (iy| While the MAIN POWER is on, switch between stand-by mode and projection mode. (page 20) Project a laser pointer. (page 24) LASER Display the MAIN MENU. MENU (page 27) o Navigate through the menus with FG1H, and activate the menu item with ENTER. (page 27) Capture the projected image as a frozen picture. (page 25) Reset some of the settings to the factory default settings. (page 25) • See CD-ROM MULTI-LIVE contents. 1_1 Control to change the scale by means of digital + zoom. (page 26) - AUTO SETUP Automatically adjust the setting of DOT CLOCK, CLOCK PHASE and SIGNAL SEARCH for the projected image of COMPUTER signal. (page 23) COMPUTER INPUT SELECT buttons Switch the required input signal button to select. I I • See CD-ROM contents. See CD-ROM contents. Return to the previous menu. Q (page 27) SHUTTER Turn off the projection temporarily. (page 25) INDEX-window Display the frozen image while the display of subsequent images continues. (page 25) DOUBLE-window Display 2 different source images at a time. (page 25) VOLUME Control to adjust the volume of the speakers. (page 26) Battery compartment 1. Press the tab and lift up the cover. 2. Insert the batteries according to the polarity diagram indicated inside. Top view Remote control signal and Laser pointer beam emitters. (page 23) Attaching a hand strap You can attach a favorite strap on to the Remote control. Remote control indicator If you press any button except the LASER button, the Remote control indicator will flash. If you press the LASER button, it will lit. Remote control indicator (!)/l (5 AUTO SETUP INPUT [ SELECT '-1 NOTE: • Do not drop the Remote control. • Avoid contact with liquids or moisture. • Use manganese batteries or alkaline batteries with the Remote control. • Do not attempt to modify or disassemble the Remote control. Contact an Authorized Service Center for repairs. • Do not keep pressing the Remote control buttons as this ...