Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins. BFailure to observe this may cause the batteries to leak, overheat, explode or catch fire. BStore the batteries in a plastic bag and keep them away from metallic objects. During a thunderstorm, do not touch the projector or the cable. BElectric shocks can result. Do not use the projector in a bath or shower. BFire or electric shocks can result. Do not BStrong light light, it can hurt Do not bring your BHeated air comes face, or objects which burns or damage could When replacing the lamp, handling it. BThe lamp cover gets very hot, and Before replacing the lamp, be sure power outlet. BElectric shocks or explosions can result if Caution Do not cover the air inlet or the air outlet. BDoing so may cause the projector to overheat, which damage to the projector. Do not set up the projector in humid or dusty places or the projector may come into contact with smoke or steam. BUsing the projector under such conditions may result in fire or electric shocks. When disconnecting the power cord, hold the plug, not the cord. BIf the power cord itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocks may result. Always disconnect all cables before moving the projector. BMoving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur. Do not place any heavy objects on top of the projector. BFailure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury. Do not short-circuit, heat or disassemble the batteries or place them into water or fire. BFailure to observe this may cause the batteries to overheat, leak, explode or catch fire, and burns or other injury may result. When inserting the batteries, make sure the polarities (+ and -) are correct. BIf the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result. Preparation Use only Accessories BIf incorrect contamination Check that all result. projector. Do not mix old and BIf the batteries are inserted injury or contamination of may result. Do not put your weight on this BYou could fall or the projector could BBe especially careful not to let young Disconnect the power cord plug from precaution before carrying out any cleaning. BElectric shocks can result if this is not done. Ask an Authorised Service Center to clean inside once a year. BIf dust is left to build up inside the projector without being can result in fire or problems with operation. BIt is a good idea to clean the inside of the projector before humid weather arrives. Ask your nearest Authorised Service Center clean the projector when required. Please discuss with the Authorised Service Center regarding cleaning costs. We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable units back to your dealer or recycling company. NOTICE: BThis product has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also contains lead in some components. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: