Votos - , Puntuación media:
(
)
)
Fabricar: Panasonic
Tamaño del archivo: 15.08 mb
Nombre del archivo: PTL730NTU.PDF
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
• If the memory card is swallowed, death by suffocation may result. If you believe that the memory card may have been swallowed, seek medical advice immediately. Caution Do not insert any foreign objects into the card slot. • Inserting foreign objects may damage the projector. If the wireless card is inserted while some foreign object is inside the slot, it may damage the wireless card. Notes with regard to the wireless card and the projector. Caution Before touching the wireless card, make sure that you earth your body to dissipate any static electric charge that might damage the card. • Static electricity from the human body can damage the wireless card. To prevent this, you should touch a nearby metallic object such as an aluminium sash or a door knob to dissipate the static charge from your body. Do not install the accessory wireless card to any device other than the card slot of the projector. • If this is not observed, damage to the device may result. Other instructions Precautions on use of SD card This SD card is a semiconductor memory with the size of 24mm x 32mm x 2.1mm, as small as a postage stamp, and is expected to be a next-generation recording medium that replaces minidisks (MDs), compact disks (CDs) and cassette tapes. The card allows repetition of data reading, writing and deleting. Instructions on handling Abstain from the following: • To disassemble or modify the card • To give the card a strong impact, twisting, bending, dropping, treading, or water wetting • To rub the card with a sheet of cloth or plastics or to bring the card near to anything that is likely to generate static electricity or electromagnetic field. • To touch the metallic terminal of card with hand or metallic object, to affix stickers, or to stain the card. • To peel off the label that is affixed to the card. • To affix other labels or stickers. • To insert the card into a device that does not accept an SD card (e.g., device for multimedia cards). • To apply excessive force when operating the lid of the card port. • To use cracked or deformed card. • To use the card in a moist place such as bathroom or in a dusty place such as warehouse. Instruction on storage Be sure to put the card in the case when it is taken out from the main body. • Do not put the card in a vehicle or in a place exposed to direct sunlight where it may become hot. • Do not put the card in a place where corrosive gases may arise. For protection of important data • Do not turn off the power or do not remove the SD card during memory reading or writing (when the SD card access lamp is blinking). Doing the above may destroy the stored data. • Do not forget to make backup of the data stored in the SD card. Note that user s important data is subject to potential destruction although it is very rare to occur. 76 To create a backup copy of the data stored on the SD card Double click and open the icon of SD card drive in My Computer of your personal computer (on the desktop if your computer is Macintosh) and drag and drop the "DCIM" folder onto desktop (while pressing the "Option" button, for Macintosh machine). This operation can create copies of all data within the "DCIM" folder into your personal computer. Write protection switch • Putting the write-protection switch of SD card to Front surface Back surface the "LOCK" position will disable image-editing operation such as deleting or moving on the projector (attempt of operation will bring error message). • If the SD card is inserted into the personal computer by means of the PC card adaptor while the write-protection switch of SD card is set to the "LOCK" position, a blue-screen warning indication will appear when access is made. If this occurs, press any button on the keyboard of your PC to return the indication to the original one. Before using an SD card in your personal computer, ensure that the write- protection switch is not set to the "LOCK" position. 8MB LOCK Write-protection switch Please be advised of the following information in advance: • The manufacturer shall not be responsible for any damage, whether direct or indirect, caused by the use of or by the fault of the product. • The manufacturer shall not be responsible for any damage or destruction of data caused by the product. Radio frequencies used by the wireless card The accessory wireless card and the optional wireless card (ET-CDWL1 series) operate on electronic frequencies within the 2.4 GHz band. You do not need a radio licence in order to use a wireless card, but you should make sure that you understand the following points before using such cards. Do not use the cards near other sources of radio emissions. The following devices may use the same frequencies that are used by the wireless card. If the wireless card is used near such devices, radio interference may prevent successful communication, or it may result in slower communication speeds being achieved. • Industrial, scientific, medical equipment, etc • Electric stoves, etc • Bu...