Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
2 ON/STANDBY indicator (located around the I / 1 key) Lights up or flashes under the following conditions: – Lights in red when a AC power cord is plugged into a wall outlet. Once in standby mode, you can turn on the projector with the I / 1 key. – Lights in green when the power is turned on. – Flashes in green while the cooling fan runs for about 90 seconds (VPL-ES2)/ for about 70 seconds (VPL-CS7) after the power is turned off with the I / 1 key. For details, see page 21. 3 INPUT key 4 TILT adjustment key For details, see“Projecting” on page 19. 5 MENU key Displays the on-screen menu. Press again to clear the menu. 6 ENTER key Enters the settings of items in the menu system. 7 Arrow keys (f/F/g/G) Select the menu or to make various adjustments. Location and Function of Controls Connector Panel VPL-CS7 VPL-ES2 INPUT AS VIDEOVIDEOAUDIO MONITOR OUT 12345 INPUT AS VIDEOVIDEOAUDIO YPB/CBPR/CR 12356 1 INPUT A connector (HD D-sub 15-pin, female) Connect to external equipment such as a computer. Connects to the monitor output on a computer using the supplied cable. When inputting a component or 15k RGB signal, use an optional cable. For details, see “To connect to a video GBR/component output connector” on page 18. 2 Video input connector Connect to external video equipment such as a VCR. • VIDEO (phono type): Connects to the composite video output of video equipment. • S VIDEO (mini DIN 4-pin): Connects to the S video output (Y/C video output) of video equipment. 3 AUDIO (stereo minijack) connector When listening to sound output from the computer, connect to the audio output of the computer. When listening to sound output from the VCR, connect to the audio output of the VCR. 4 Monitor output connector (VPLCS7 only) Connects to the monitor input on a monitor. Outputs the signal from a computer connected to INPUT A. 5 AC IN socket Connects the supplied AC power cord. 6 Component input connector (for VPL-ES2 only) According to the connected equipment, component (Y/CB/CR), HDTV or DTV (Y/PB/PR) signal is selected. Overview Location and Function of Controls 13 Remote Commander 1 I / 1 (on/standby) key 2 ENTER/arrow key (v/V/b/B) Press the center of the key to use ENTER. 3 MENU key 4 D ZOOM +/– key Enlarges the image at a desired location on the screen. 5 Infrared transmitter 6 FREEZE key Used to freeze the picture projected. To cancel the freeze function, press the key again. 7 INPUT key 8 APA (Auto Pixel Alignment) key Adjusts a picture clearest automatically while a signal is input from a computer. For details, see “Smart APA” in the SET SETTING menu on page 33. 9 D KEYSTONE key Used to adjust the tilt of the projector, or the trapezoidal distortion of the image manually. Each time you press this key, the Tilt menu and the V Keystone menu is displayed alternately. Use the arrow key (v/V/b/B) for the adjustment. q; RESET key Resets the value of an item back to its factory preset value or returns the enlarged image back to its original size. This key functions when the menu or a setting item is displayed on the screen. Before using the Remote Commander Pull out the clear film from the lithium battery holder. To replace battery 1 Release the lock of the lithium battery holder by picking it, and pull out the holder from the Remote Commander. 2 Install the lithium battery. + side facing upward 3 Put the lithium battery holder back into the Remote Commander. Notes on the lithium battery • Keep the lithium battery out of the reach of children. • Should the battery be swallowed, immediately consult a doctor. Location and Function of Controls Notes on Remote Commander operation • Make sure that nothing obstructs the infrared beam between the Remote Commander and the remote control detector on the projector. Direct the Remote Commander toward the remote control detector. • The operation range is limited. The shorter the distance between the Remote Commander and the remote control detector is, the wider the angle within which the commander can control the projector becomes. Overview Location and Function of Controls 15 B Projecting the Picture Installing the Projector This section describes how to install the projector. The distance between the lens and the screen varies depending on the size of the screen. Use the following table as a guide. Distance between the screen and the center of the lens Unit: m (feet) Screen size (inches) 40 60 80 100 120 150 200 300 Minimum 1.1 1.7 2.3 2.9 3.5 4.4 5.9 8.8 Distance (3.6) (5.6) (7.5) (9.5) (11.5) (14.4) (19.4) (28.9) Maximum 1.4 2.1 2.83.54.2 5.3 7.0 10.6 Distance (4.6) (6.9) (9.2) (11.5) (13.8) (17.4) (23) (34.8) There may be a slight difference between the actual value and the design value shown in the table above. Installing the Projector To connect a computer Connecting the Ex. VPL-CS7 Projector When you connect the projector, make sure to: • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; loose c...
Otros modelos de este manual:Proyectores - VPL-ES2 (914.17 kb)