Votos - 3, Puntuación media: 3.7
(
)
)
|
Fotos y especificaciones Sony VPL-CX75 |
Otros manuales para este modelo:
Resumen del manual
Check the connection and turn on the equipment. Accessing from the Computer You can access the Web page of the projector by either of the following two ways. Right-click the projector button in the main window of Projector Station for Air Shot and click the displayed [Show Projector Web]. Start a browser of the computer (Internet Explorer 5.0 or higher) and enter the address “xxx.xxx.xxx.xxx (IP address of the projector)”. Note If the browser of your computer is set to “Access the Internet using a proxy server,” enter the IP address of the projector in the box “Access the Internet without using a proxy server” when you have access to the projector from your computer. Setting/Operating via Web Confirming the State of Projector Settings (Information) Click [Information]. You can confirm the current state of the projector on the computer. You cannot change the settings of the projector. Click [Refresh] when the setting of the projector is changed after displaying the information window. Setting the Connecting Mode (Simple Mode) Click [Simple Mode]. Set the Simple Mode and User Memory. Click the [Apply] button to reflect the projector. Simple Mode: set the Simple Mode. When [On] is selected, the mode is set to easy connection mode with no need for network and wireless settings. When [Off] is selected, the user settings are needed. User Memory: select the user memory. Setting/Operating via Web Operating the Projector on Setting the Projector and the Computer (Control) Password (Setup) Click [Control]. You can control the projector on the computer. Click [Setup]. The dialog box for input of the password appears. Enter the administrator’s name and password. The administrator’s name is fixed to [root]. No password is set at the factory. Set for using the network function. Click [Projector Setting] or [Password] and set each item. The current state is reflected in the projector by clicking the [Apply] button. Setting/Operating via Web Projector setting Click [Projector Setting]. Projector Name: enter a projector name. Simple Mode: set [On] or [Off]. When [Off] is selected, set the following. Network Mode: select [Ad-hoc (peer-topeer)] or [Wireless Access Point]. SSID: enter the same network name as that of the connected computer. A maximum of 32 characters/numbers can be entered. Network Channel: when [Ad-hoc (peerto- peer)] is selected in [Setting], you can select from 1 to 11. When [Wireless Access Point] is selected in [Setting], [Auto] is selected. Notes • When the network channel is changed, disconnect the projector and computer and remove the USB wireless LAN module from the computer. The setting becomes effective after connecting them again. • You may not be able to use some channel according to the country. Data Encryption (WEP): select the data encryption system. You can select from among [Off], [64 (40) bit ASCII], [128 (104) bit ASCII], [64 (40) bit HEX], [128 (104) bit HEX]. When [Off] is selected, [Key] does not function. Key: when [Data Encryption (WEP)] is used, enter the key. Enter the same key as that of the computer. The number of the characters/figures is due to the setting of the [Data Encryption (WEP)]. • 64 (40) bit ASCII: five characters/numbers/ symbols • 128 (104) bit ASCII: 13 characters/numbers/ symbols • 64 (40) bit HEX: ten numbers from 0 to 9/ characters from a to f • 128 (104) bit HEX: 26 numbers from 0 to 9/ characters from a to f Note When [64 (40) bit ASCII] or [128 (104) bit ASCII] is selected, the capital and small letters are discriminated. IP Address setting: set [Obtain an IP address automatically (DHCP)] or [Specify an IP address]. When [Specify an IP address] is selected, set [IP Address], [Subnet Mask] and [Default Gateway]. Note A DHCP server is needed to make DHCP valid. User Memory: select from [User 1] to [User 5]. Edit: click when you want to enter a new user memory name. User Memory Name: enter the user memory name. Set to List: click to register the added user memory name. Cancel: click to cancel the user memory name. Setting/Operating via Web Password Click [Password]. Administrator: enter [Password] and [Confirm Password]. The name is fixed to [root]. Guest: enter [Name], [Password] and [Confirm Password] of the user. Setting/Operating via Web Other Troubleshooting Symptom Cause and Remedy The computer is not displayed in the PC list. (Projector) or The projector is not displayed in the main window of Projector Station for Air Shot. (Computer) • Projector Station for Air Shot is not installed in the computer nor started. c Install it. c Start Projector Station for Air Shot. • The supplied wireless LAN card is not inserted into the slot of the projector or a card other than the supplied one is inserted. c Insert the supplied wireless LAN card. • The signal is extremely poor (the computer is distant from the projector or there is an obstacle such as a concrete wall or a steel partition/door between the computer and projector). c Place the computer and projecto...
Otros modelos de este manual:Proyectores - VPL-CX85 (685.78 kb)