Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
L AUDIO IN R ANALOG IN-1 ANALOG IN-2 AUDIO OUTL AUDIO IN R SERVICE PORT AUDIO IN MONO MONO VIDEO IN S-VIDEO IN PHONE PHONE ANALOG IN-1 ANALOG IN-2 VGA cable (supplied) To mini D-Sub 15-pin connector on the projector. It is recommended that you use a commercially available distribution amplifier if connecting a signal cable longer than the supplied one. Audio cable (not supplied) NOTE: For older Macintosh, use a commercially available pin adapter (not supplied) to connect to your Mac's video port. IBM VGA or Compatibles (Notebook IBM PC or Compatibles (Desktop type) type) or Macintosh (Notebook type) or Macintosh (Desktop type) NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back via a commercially available scan converter. This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following. * When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly: Project an image to fill the screen and then press the AUTO PC button on the remote control or the projector cabinet. 14 2. Installation and Connections To connect Scart output (RGB) L AUDIO IN R ANALOG IN-1 ANALOG IN-2 AUDIO OUTL AUDIO IN R SERVICE PORT AUDIO IN MONO MONO VIDEO IN S-VIDEO IN ANALOG IN-1 Video equipment such as DVD player Female LV-CA35 Projector To ANALOG 1 input Commercially available Scart cable Before connections: An exclusive Scart adapter (LV-CA35) and a commercially available Scart cable are required for this connection. NOTE: Audio signal is not available for this connection. From the menu, select [Advanced settings] > [Input signal select] > [Computer 1] > [SCART]. Scart is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro- connector. TIP: If a DVD or VCR source will not be displayed correctly, stop playback and restart it. NOTE: The LV-CA35 Scart adapter is obtainable from your dealer in Europe. Contact your dealer in Europe for more information. 15 2. Installation and Connections Connecting an External Monitor L AUDIO IN R ANALOG IN-1 ANALOG IN-2 AUDIO OUTL AUDIO IN R SERVICE PORT AUDIO IN MONO MONO VIDEO IN S-VIDEO IN VGA cable (supplied) VGA cable (not supplied) You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog image you're projecting. NOTE: Daisy chain connection is not possible. NOTE: Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor turns down the sound. 16 2. Installation and Connections Connecting Your DVD Player with Component Output L AUDIO IN R ANALOG IN-1 ANALOG IN-2 AUDIO OUTL AUDIO IN R SERVICE PORT AUDIO IN MONO MONO VIDEO IN S-VIDEO IN ANALOG IN-1 AUDIO IN Optional 15-pin - to - RCA (female) Component video RCA3 cable (not supplied) AUDIO IN L R AUDIO OUT L R Component Y Cb Cr DVD player Audio Equipment Audio cable (not supplied) 3 cable (LV-CA32) A component signal will be automatically displayed. If not, from the menu, select [Advanced settings] > [Input signal select] > [Computer 1], and then place a check mark in the COMPONENT radio button. NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements. 17 2. Installation and Connections AUDIO IN L RAUDIO OUT L R VIDEO OUT S-VIDEOVIDEO L AUDIO IN ANALOG IN-1 ANALOG IN-2 AUDIO OUTL AUDIO IN R SERVICE PORT AUDIO IN MONO VIDEO IN S-VIDEO IN S-VIDEO IN VIDEO IN AUDIO IN AUDIO IN Connecting Your VCR or Laser Disc Player S-Video cable (not supplied) Video cable (not supplied) VCR/ Laser disc player Audio equipment Audio cable (not supplied) NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output requirements. NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter. 18 2. Installation and Connections Connecting the Supplied Power Cord Connect the supplied power cord to the projector. First connect the supplied power cord's two-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cord in the wall outlet. MENU BACK WARNING POWER PUT VOL- VOL+ LAMP L AUDIO IN R ANALOG IN-1 ANALOG IN-2 L AUDIO IN R SERVICE PORT AUDIO IN MONO MONO VIDEOIN S-VIDEOIN To wall outlet< Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. CAUTION: Do not unplug the power cord from the wall outlet under any one of the following circumstances. Doing so can cause damage to the projector: • While the Hour Glass icon appears. • While the cooling fans are running. The cooling fans continue to work for 30 seconds after the projector is turned off. • While the lamp is lighted. 19 20 3. P...