Votos - 2, Puntuación media: 4 ( )

Fabricar: Casio Tamaño del archivo: 5.99 mb Nombre del archivo: Idioma del manual:

Terms and Conventions In this manual, there are many procedures that require parallel operations on the Data Projector and your computer. The following are special terms and conventions used in this manual to differentiate between the Data Projector and computer. • Projection area This is the entire rectangular area that is projected by the Data Projector. Certain Data Projector operations will cause messages and menus to appear within the projection area. • Computer screen This is the physical display device of your computer. 5 What the Wireless Function Lets You Do... What the Wireless Function Lets You Do... The projector has a built-in function that lets it operate as a wireless LAN access point. After a wireless LAN connection is established with a computer, the contents of the computer screen can be sent to the projector for projection. The projector supports simultaneous wireless LAN connections with up to four computers. The projection screen can be divided into four parts for simultaneous projection of the screen contents of all four connected computers. Important! To perform the above operation, the Wireless Connection 3 software that comes with the projector must be installed on a computer equipped with a wireless LAN function (IEEE 802.11b/g/n). For more information, see “Installing Wireless Connection 3” (page 8). 6 Projector Requirements Projector Requirements The projector must meet the following conditions in order to use a wireless LAN connection to project computer screen contents. • The wireless adapter that comes with the projector must be installed correctly on the projector. See “Installing and Removing the Wireless Adapter” (page 40) for details. • The Wireless Connection 3 software that comes with the projector must be installed on a computer equipped with a wireless LAN function (IEEE 802.11b/g/n). Note that the following operations are not supported. • Use of a CASIO YW-2L wireless adapter or a commercially available wireless LAN adapter in the projector’s USB port. Such adapters will not provide proper operation. • Any software other than Wireless Connection 3 that comes with a CASIO data projector or any third-party wireless LAN connection software. You will not be able to establish a wireless LAN connection between your computer and the projector using such software. 7 Installing Wireless Connection 3 Installing Wireless Connection 3 Minimum System Requirements You need to install Wireless Connection 3 on your computer in order to send computer screen contents to the projector over a wireless connection for projection. Operating System : Microsoft® Windows® 7, Windows Vista® SP2, Windows® XP SP3 Computer : IBM PC/AT or compatible that satisfies the following conditions. • Windows® 7, Windows Vista®, or Windows® XP pre-installed • CPU: Pentium® M 1.6GHz or higher, or CPU recommended for operating system being used • Memory: The amount of memory recommended for operating system being used • Display: Full-color display with resolution of at least 1024 . 768 that is supported by above operating systems and the computer being used. • Input Device: Keyboard or other pointing device (mouse or equivalent device supported by above operating systems) • Wireless LAN: IEEE 802.11b/g/n • Other requirements of operating system being used • Normal operation may not be possible under certain hardware configurations. • Operation is not supported on a computer running Windows® 2000, NT, Me, 98SE, 98, 95, or 3.1, or on a Macintosh or Mac OS computer. • Operation on a computer upgraded to Windows® 7, Windows Vista®, or Windows® XP from another operating system is not guaranteed. • Operation on a computer running Windows® XP Professional x64 Edition is not supported. 8 Installing Wireless Connection 3 1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM drive. • This will automatically display the CD-ROM menu screen. 2. On the menu screen, click the [Install] button to the right of “Wireless Connection 3”. • Follow the instructions on the dialog boxes that appear on the screen. • If you are running Windows 7 and the “User Account Control” message appears while installing, click [Yes]. • If you are running Windows Vista and the “User Account Control” message appears while installing, click [Allow]. • If you are running Windows XP and message shown below appears while installing, click [Continue Anyway]. Note After you install Wireless Connection 3, it will start up automatically and start searching for a projector. If you want to establish a wireless LAN connection between the computer and projector at that time, perform the procedure under “To use a default SSID to connect a computer to the projector via wireless LAN” (page 14). If you do not want to establish a connection, click the close button in the upper right corner of the Wireless Connection 3 window. Installing Wireless Connection 3 on a Second and Subsequent Computers You can use the Wireless Connection 3 token wiza...

Descargar ahora

Introduzca dos números de la imagen: