Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
18. Servicing Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. Before Using 7 IMPORTANT SAFETY (Continued) 19. Replacement When replacement are required, be sure the technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. (Replacement of the lamp only should be made by users.) 20. Safety Check Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 21. Do not leave thermal-paper documents or easily deformed items on top of the unit or near the air exhaust for long periods of time. The heat from the unit could erase the information on the thermal paper, or cause deformation or warping. 22. Do not use a closed installation Do not place the product or in any other closed installation state. Otherwise it may overheat. This could result in a risk of fire. 23. Do not look into the laser light source of the remote control or direct the laser pointer toward a person or a mirror. The laser beam may cause damage to the eyes or sight. 24. When using a wireless LAN PC card: • Do not use near people with heart pacemakers • Do not use near electronic medical equipment, or in hospitals or other medical institutions • Do not use inside aircraft or in places where the wireless LAN card could interfere with electromagnetic signals. The electromagnetic interference could cause a malfunction, resulting in an accident. 25. If the use of a wireless LAN PC card interferes with another device’s electromagnetic signals, cease use immediately. The electromagnetic interference could cause a malfunction, resulting in an accident. 8 POWER CORD If your line voltage is 220 to use one of the types of cable. Plug Plug configuration Plug type Line voltage configuration Plug type Line voltage EURO 220 – 240V Australian 240V 200 – 240V 10A Switzerland 200 – 240V UK 220 – 240V 240V 6A Use a 5A fuse which is approved by ASTA or BSI to BSI362. Always replace the fuse cover after changing the fuse. North American 240V 15A 200 – 240V IMPORTANT PRECAUTIONS Save Original Packing Materials The original shipping carton and packing materials will come in handy if you ever have to ship your projector. For maximum protection, repack the set as it was originally packed at the factory. Moisture Condensation Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the lens and the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature. Place and Manner of Installation • Do not place in hot locations, such as near heating equipment. Doing so could cause malfunction, and shorten the life of the projector. •Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening their lives, and darkening the screen. • Do not use this product in the upright position or tilt it up or down by more than 20° from level. Doing so may cause a failure or shorten the life of the product. • Using this instrument near a TV or radio may cause interference to the images or audio sound. If this happens, move it away from the TV or radio. •Moving the projector from a low-temperature room to a high-temperature room may cause condensation on the lens or internal parts in the instrument. If you continue to use it in that situation, the malfunction may result. Ensure to wait until the condensation naturally disappears. • In a high altitude location where air is thin, cooling efficiency is reduced so use the projector with [ Fan mode] set to [ High]. p.44 9 Before Using IMPORTANT PRECAUTIONS (Continued) Avoid Volatile Liquid Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching a long time. They will leave marks on the finish. If cleaning with a chemically cloth, be sure to follow the product's precautions. Wireless LAN PC Card • Do not connect the supplied wireless other than this unit. Doing so could cause malfunction. • To protect the PC card from static electricity, touch some nearby metal, such as a doorknob or aluminum window frame, before touching the PC card, to rid your body of static electricity. • This PC card is a radio product. Concerning the regulations applied in each country/area, please refer to “Information to the user” supplied. EXEMPTION CLAUSES •Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts by third parties, other accidents,...
Otros modelos de este manual:Proyectores - TDP-TW355U (8.05 mb)