Votos - , Puntuación media: ( )

Manual de usuario Toshiba, modelo Conference Room Projectors TLP-561

Fabricar: Toshiba
Tamaño del archivo: 1.98 mb
Nombre del archivo:

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

When the message disappears, operation becomes invalid. Press ON/STANDBY again. Cooling starts. Once cooling is completed, the LAMP and FAN indicators turn off and the standby mode is set. (The ON indicator turns in orange.) To protect the light source lamp, the LAMP indicator blinks as long as a minimum of cooling is necessary. The power cannot be turned back on during this time. Unplugging the power cord at this time will shorten the lamp’s duration life. The cooling fan continues to run for a while to expel the heat remaining inside. If you are in a hurry, however, you may unplug the power cord at this time. The standby mode is set. 1 2 (Green) (Green) (Green) (Off) (Off)(Off) Flashing(Orange) (Orange) A B C ON LAMP FAN ON LAMP FAN ON LAMP FAN(Orange) ON/STANDBY ON/STANDBY ON/STANDBY ON/STANDBY B C A Notes • The projector consumes about 15W of power in the standby mode. We recommend you unplug the power cord when not using the projector for long periods of time. • Be sure that the LAMP indicator has turned off before unplugging the power cord. Cutting the power by unplugging the power cord while the projector is operating or the light source lamp is being cooled will shorten the lamp’s duration life. Should a fault or some other irregularity arise with this unit, unplug the power cord. • When reinserting the power plug before the lamp has cooled, please wait until the lamp has cooled sufficiently before use. When the lamp is at a high temperature, it may not light and it’s life duration will be shortened. Adjusting the picture automatically CONTENTS 34 MENU ON / INPUT ENTER CT-90106 KEYSTONE AUTO SET EXIT / P.MODE PIP FREEZE MUTE CALL RESIZE VOL / ADJ STANDBY Remote control 2 Control panel (Main unit side) KEYSTONE AUTOSET EXIT ON / STANDBY VOL / ADJ ENTER MENU INPUT FANTEMPLAMPON 2 You can adjust the optimum horizontal position, vertical position, sampling phase and sampling frequency for projecting analog RGB signals at the touch of a button. Operations 1 2 AUTO SET AUTO SET Input full screen video signals from the input source (computer) and project the image. Adjustments may not be performed properly for images that are not displayed on the entire screen or for extremely dark images. Press AUTO SET. The horizontal position, vertical position, sampling phase and sampling frequency are adjusted automatically. The icon appears during signal processing. Notes • Automatic adjustment may not be performed properly for signals other than those computers’ signals with which the projector is compatible. • The horizontal position, vertical position, sampling phase and sampling frequency can also be adjusted from the menu screen 47 . * Sampling frequency Analog RGB signals input from the computer are converted into digital signals inside the projector. The sampling frequency is the number of times per second the analog signals are converted into digital signals. In order to capture (sample) each individual ...