Votos - 2, Puntuación media: 4 ( )

Fabricar: Toshiba Tamaño del archivo: 3.09 mb Nombre del archivo: Idioma del manual:

62 Making a presentation JPEG files 1) Copy the folder created by the JPEG Conversion Tool, or its contents, onto a memory PC card. 2) Use the steps 1 , 2 in “ Projecting images stored in a memory PC card” p.41 to display a list of thumbnails. 3) Follow the instructions in step 3 to find slide001.jpg (the first slide), the orange frame over it (select slide001.jpg). 4) Set the remote control to [PJ Mode], button. An enlarged view of the first slide appears on the screen. This starts the presentation. 5) To continue to the next slide, click on the remote control’s button. To go back to the previous slide, click on the button. . Creating a screen capture and converting it into a JPEG file This function saves the current computer screen as a JPEG file. (1) In the Conversion Method field, select Creating screen capture. (2) In the File settings field, click on the Browse button for File name after conversion. The Save As dialog box appears. (3) In the Save As dialog box: (a) Specify the location in which to save the converted file; (b) Enter a file name of up to 8 characters in the File Name field; and (c) Click on the Save button. (1)(1) (2)(2) (4)-(a)(4)-(a) (4) (a) In the JPEG Conversion Tool window, click on the Conversion button. (b) A confirmation message appears. Click Yes. The computer creates a screen capture, and converts it into a JPEG file in the specified location. When it is finished, a message appears to tell you that a JPEG file has been created. (3)-(b) (3)-(c) (3)-(a) (4)-(b)(4)-(b) Note • The maximum resolution of JPEG files created with the JPEG Conversion Tool is 1,024 x 768 pixels. 63 Others Trouble indications Trouble indications The indicator lights you of internal abnormalities. If you think something the following before contacting Please see “ Trouble indications” p.64 as well. ONLAMPTEMPFAN or (Red lit) (Off) No power . Problem with projector • Unplug the power cord, and contact your dealer. ONLAMPTEMPFAN Lamp went out during use, or won’t come on (Red lit) (Red lit) . Returns to standby after about 2 minutes. If the projector fails to operate normally after turning the power back on, either the lamp needs replacing, or there is a problem with the projector. • If a lamp burns out, replace it with a new one. • Unplug the power cord, and contact your dealer. ONLAMPTEMPFAN Power went out during use, or power won’t come on (Green lit) (Red lit) (Red lit) . Internal overheating, or the outside temperature is too high. • Place the projector so that the air intake and exhaust are not Or (Off) Or (Orange lit) blocked. • Unplug the power cord and wait for a shor t while, then turn the Or (Green lit) power back on. • Clean the air filter. p.56 . The icon will appear before the power goes out. . After displaying the abnormal state for about 2 minutes, returns to standby. ONLAMPTEMPFAN Power went out during use, or power won’t come on (Red lit or flashing) (Red lit) . Problem with internal cooling fan. • Unplu...

Descargar ahora

Introduzca dos números de la imagen: