Votos - 5, Puntuación media: 4.6
(
)
)
|
Resumen del manual
To stop P-TIMER display, press P-TIMER button. And then, press PTIMER button again to cancel P-TIMER function. SOUND ADJUSTMENT Indicates roughly level of volume. DIRECT OPERATION Volume Press VOLUME (+/–) button(s) on Top Control or on Remote Control Unit to adjust volume. Volume dialog box appears on screen for a few seconds. (+) button to increase volume, and (–) button for decreasing. Mute Press MUTE button on Remote Control Unit to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/–) button(s). MENU OPERATION 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to SOUND Menu icon. 2 2 Press POINT DOWN button to move a red frame pointer to item that you want to select, and then press SELECT button. Volume To increase volume, press POINT RIGHT button, and press POINT LEFT button for decreasing. Press MUTE button to set Mute function On or Off. Display disappears after 4 seconds. SOUND MENU Indicates roughly level of volume. SOUND Menu icon Close SOUND Menu. Mute Press POINT LEFT/RIGHT button(s) to cut off sound. Dialog box display is changed to “On” and sound is cut off. To restore sound to its previous level, press POINT LEFT/RIGHT button(s) again. COMPUTER INPUT SELECTING INPUT SOURCE INPUT button DIRECT OPERATION Choose Computer by pressing INPUT button on Top Control or on Remote Control Unit. If projector cannot reproduce proper image, select correct input source through MENU OPERATION (see below). Input 1 Input 2 Input 3 MENU OPERATION 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to select Input and press SELECT button. Another dialog box INPUT SELECT Menu will appear. 2 2 Press POINT DOWN button and a red-arrow icon will appear. Move arrow to INPUT source that you want to select, and then press SELECT button. INPUT Menu icon SELECTING COMPUTER SYSTEM WHEN SELECT INPUT 1 (COMPUTER INPUT TERMINALS ) 1 1 Press MENU button and ON-SCREEN MENU will appear. Press INPUT MENU POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 2 2 Press POINT DOWN button to move a red arrow pointer to Input 1 and then press SELECT button. Source Select Menu will appear. 3 3 Move a pointer to either Digital or Analog and then press SELECT button. Source Select Menu Digital Analog When your computer is connected to COMPUTER Move a pointer to Digital orINPUT (DIGITAL) terminal, select RGB (Digital). Analog and press SELECT button. When your computer is connected to COMPUTER INPUT (ANALOG) terminal, select RGB (Analog). Input 1 Move a pointer (red arrow) to Input 1 and press SELECT button. INPUT Menu icon WHEN SELECT INPUT 2 (5 BNC INPUT JACKS ) When connect a computer output [5 BNC Type (Green, Blue, Red, INPUT MENU Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V jacks. 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. 2 2 Press POINT DOWN button to move a red arrow pointer to Input 2 and then press SELECT button. Source Select Menu will appear. 3 3 Press POINT DOWN button and a red-arrow icon will appear. Move arrow to "RGB", and then press SELECT button. Input 2 Move a pointer to RGB and press SELECT button. INPUT Menu icon Move a pointer (red arrow) to Input 2 and press SELECT button. Source Select Menu COMPUTER INPUT AUTOMATIC MULTI-SCAN SYSTEM This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 28). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers need setting manually.) Note : Projector may display one of following messages. Auto When projector cannot recognize connected signal as PC system provided in this projector, Auto PC Adjustment PC SYSTEM MENU function operates to adjust projector and message “Auto” is displayed on SYSTEM Menu icon. When image is not provided properly, manual adjustment is required. (Refer to P26 and 27.) PC SYSTEM Menu icon Displays system being –––– There is no signal input from computer. Make sure selected. connection of computer and a projector is set correctly. (Refer to TROUBLESHOOTING on page 42.) D-VGA, D-SVGA or D-XGA When digital computer signal is received on DVI terminal, above message is displayed on PC SYSTEM Menu icon. SELECT COMPUTER SYSTEM MANUALLY This projector automatically selects PC system among those provided in this projector and PC system can be also selected manually. 1 1 Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to PC SYSTEM Menu icon. 2 2 Press POINT DOWN button to move a red arrow pointer to system that you want to set, and then press SELECT button. PC SYSTEM MENU PC SYSTEM Menu icon Displays system being selected. Systems on this d...
Otros modelos de este manual:Proyectores - TLP-X4100U (887.4 kb)