Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Pressing the button switches Full/Thru/Wide in turn. Notes • Thru display is available for computer-input images. • [ Screen size] of the Display setting menu has the same function . • If you use this function on commercial video broadcast or cable-broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. ¦ Freezing the image (Freeze) Remote Control The image being projected can be frozen. This function is to be used to pause a video during a presentation, etc. Press the remote control’s FREEZE button. The picture pauses. (The Freeze function is released when pressing the FREEZE button again.) Notes • The icon will appear while freeze is in effect. • Other operation will also release the freeze. •Even if an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on commercial video software, broadcast or cable-broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. 32 ¦ Setting the How to change password The default password is 0000. 1 Select [Password] in or button. 2 Select [Password registration] menu, and press the button. The password entry screen is displayed. 3 Enter the current password (4-digit number). • Enter a 4-digit number for the password using numeric keys of the remote control. • Enter [0000] (4 zeros) for the first change. • The password is not displayed. Instead it appears as [****]. 4 Enter a new password (4-digit number) . 5 Re-enter the same password for confirmation. Note • Please do not forget your password. If you forget the password, you can not release the password by yourself. In such a case, please inquire your dealer. 33 Operations Using How to set password 1 Select [Password] or button. 2 Select [Password setting] and press the or button. 3 Select [On] . 4 Select [OK] and press the button. The password entry screen is displayed. 5 Enter the password using numeric keys 6 The password setting will be set as [On]. How to operate when password is [On] 1 Turn on the power. 2 The lamp lights and the password entry screen appears. 3 Enter the password using numeric keys of the remote control. If the entered password is correct, the start-up screen appears and the projector goes into normal operation. If the password is wrong, a message appears to prompt you to re-enter the password, and again the password entry screen is displayed. If you enter a wrong password for more than 5 times, the projector will automatically power off and enter standby mode. Note •Even if you have forgot the password setting, the password setting can be forcibly set to [ On], by detaching the control panel from the projector first when the power is turned back on after the power cord has been unplugged. If you can not change the previous password, please input [0000] (4 zeros) using numeric keys of the remote control. How to set password 1 Select [Password] or button. The password entry screen is displayed. 2 Enter the password using 3 Select [Password setting] in and press the or button. 4 Select [OFF] . 5 Select [OK] and press the button. Note • While the password setting is [ On], the password entry screen will be displayed only when the power is turned on next time. Operations 34 35 Using You can call up and conduct a of adjustments ¦ The image operation buttons p.16 on the control panel Use this menu to set or adjust image-Items that can be marked with “Yes”, and those that cannot with “No”. (When an item is masked, ¦ How to use the menus it indicates that you cannot select for the current input.) The menu shown below is for operation instructions purposes and might differ from the actual display. 1. Press the MENU button Display the Setting display menu. 2. Select a Category 3. Adjustments & Settings Select a category by using . There are following 5 categories: Displays the current adjustments and settings of selected category. Item shown with gray cannot be adjusted with the current input source. p.37Image adjustment menu p.39Display setting menu Default setting 1 menu p.42 Press or to open the menu. Default setting 2 menu p.43 Status display menu p.44 Toggle items with . Select items with and press . Fix selection with . • The figure shows displays given for operation instructions purposes. As the display may differ depending on the item, use the following pages as a reference. • To return to previous item, press the RETURN button. Item Adjustment/Setting Value These marks signify the items can be adjusted/set by using . These marks signify the items can be selected from the list by using . After an item is selected, apply it by pressing . These marks signify that there are options. Press or to display a list of options. These marks signify that there are setting screens. Press or to display a list of setting screens. * When no item is changed, press . 4. End Press the MENU butto...
Otros modelos de este manual:Proyectores - TLP-XC2000U (5.27 mb)