Votos - 2, Puntuación media: 4.5
(
)
)
|
Otros manuales para este modelo:
Proyectores - XJ-H2600 (19.47 kb)
Proyectores - XJ-H2600 (18.79 kb)
Resumen del manual
To check your firmware version 1. Check to make sure there is no memory card loaded in the PJ Digital Camera. If there is a memory card loaded, remove it. 2. On the camera, hold down the [MENU] button as you press the [ON/OFF] (Power) button to turn on power. Keep [MENU] depressed until the version of the camera’s firmware appears on the monitor screen. 3. After a short while, the version number will disappear from the display. Important! • If update software installation is interrupted due to low battery power, the camera will no longer be able to operate. Be sure to load a fully charged battery into the camera before starting the update software installation procedure. Note that you perform update software installation at your own risk. • If you are unable to restart the camera after installing the update software, contact the Authorized Service Center of your local CASIO distributor or a CASIO service center. Tell them you need assistance because your camera will not restart after installing YC-400 update software. • Before installing the update software, be sure you back up the data in camera memory and on the memory card to your computer’s hard disk. • Installing the update software can cause changes in the camera’s image memory size, camera startup time, recording time, recording interval, user settings, etc. • Note that installation of the update software cannot be undone. Once you install the update software, there is no way to restore the camera to its original firmware version. • The product warranty on your camera remains in effect in accordance with the warranty card you received when you purchased the camera, regardless of whether or not you install the update software. Requirements for Installing the Update Software on Your Camera • The installation procedure temporarily writes the update software to a memory card. The following items are required for installation: SD/MMC memory card with at least 5MB of free space, and the USB cable and USB cradle that come with the camera. • If you do not have an SD/MMC memory card or if you do not have the update software on hand for some reason, contact your nearest CASIO service center and request installation from them. Note that if you do request installation, you will need to leave your camera at the CASIO service center for a few days. 2 To prepare firmware you downloaded from the CASIO website 1. Visit the CASIO website below and download “YC-400 Firmware Update Software ver.1.1” to your computer. 2. Double-click the file you downloaded and then follow the instructions that appear on your computer screen. When you click [OK] on the dialog box for specifying the file extraction destination, the file will self-extract and create a file named “YC-400.bin” in the folder you specify. 3. Next, perform the procedure under “To install the update software on your camera”. To prepare firmware on the CD-ROM (that comes with some projector models) 1. Place the CD-ROM that comes with the projector into your computer’s CD-ROM drive. 2. On the menu screen that appears, ...
Otros modelos de este manual:Proyectores - XJ-H2650 (6.27 mb)