Votos - 3, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Sony VPL-AW15 |
Resumen del manual
Connections and Preparations 11 12 Step 1: Installing the Projector The projector displays pictures output from a VCR or other devices. The projector can be used in various places and you can enjoy viewing beautiful pictures easily. Unsuitable installation Do not place the projector in the following situations, which may cause malfunction or damage to the projector. Poorly ventilated location Hot and humid Locations subject to direct cool or warm air from an air-conditioner Installing the projector in such a location may cause a malfunction of the unit due to moisture condensation or rise in temperature. Near a heat or smoke sensor Malfunction of the sensor may occur. Very dusty and extremely smoky locations Install in a location away from walls To maintain the performance and reliability of the projector, allow at least 30 cm (11 7/8 inches) between the projector and walls. Before Setting Up the Projector Improper use Do not do any of the following while using the projector. Blocking the ventilation holes. 15° or more Connections and Preparations Ventilation holes (intake) Ventilation holes (exhaust) Tip For details on the location of the ventilation holes (intake or exhaust), see “Location of Controls” on pages 8 to 9. Tilting front/rear and left/right 15° or more 15° or more 15° or more Avoid using the projector tilted at an angle of more than 15 degrees. Do not install the projector anywhere other than on a level surface or on the ceiling. Failing to set this mode when using the projector at high altitudes may result in uneven color uniformity and reducing the reliability of the effects of the lamp. When installing the unit at altitudes When using the projector at an altitude of 1,500 m or higher, set “Cooling Setting” in the Setup menu to “High” (1 page 46). Failing to set this mode when using the projector at high altitudes could have adverse effects, such as reducing the reliability of certain components. 15° or more 13 Positioning the Projector and a screen The installation distance between the projector and a screen varies depending on the size of the screen. 1 Determine the installation position of the projector and screen. You can obtain a good quality picture if you position the projector with the center of the lens within the areas indicated in the gray areas in the illustration (VPL-AW15 only). Use the values a, b, c and d in the table on page 15 as a guide. Screen a: Minimum projection distance between the screen and the center of the projector’s lens b: Maximum projection distance between the screen and the center of the projector’s lens (VPL-AW15 only) *c: Vertical distance between the center of the screen and the center of the projector’s lens when using the maximum upper vertical lens shift feature *d: Horizontal distance between the center of the screen and the center of the projector’s lens when using the maximum horizontal lens shift feature * The distances c and d indicated in the illustration show those in the lower or left direction. The same distances in the upper or right direction are appropriate for installation. • For installation of the projector on a ceiling, see “Ceiling Installation.” (1 page 66) • For details on the lens shift feature, see “Step 3: Adjusting the Picture Position.” (1 page 21) When using the 16:9 aspect ratio screen Unit: mm (inches) Screen 40 60 70 80 100 120 140 160 180 200 size (inches) (mm) 1016 1524 1778 2032 2540 3048 3556 4064 4572 5080 a (minimum) 1151 (45 3/8) 1750 (69) 2049 (80 11/16) 2348 (92 1/2) 2946 (116) 3544 (139 5/8) 4142 (163 1/8) 4740 (186 3/4) 5339 (210 1/4) 5937 (233 7/8) b (maximum) 1885 (74 1/4) 2849 (112 1/4) 3332 (131 1/4) 3814 (150 1/4) 4779 (188 1/4) 5744 (226 1/4) 6709 (264 1/4) 7673 (302 1/8) 8638 (340 1/8) 9603 (378 1/8) *c 324 (12 3/4) 485 (19 1/8) 566 (22 3/8) 647 (25 1/2) 809 (31 7/8) 971 (38 1/4) 1133 (44 5/8) 1294 (51) 1456 (57 3/8) 1618 (63 3/4) *d 221 (8 3/4) 331 (13 1/8) 387 (15 1/4) 442 (17 1/2) 552 (21 3/4) 663 (26 1/8) 773 (30 1/2) 884 (34 7/8) 994 (39 1/4) 1105 (43 1/2) To calculate the installation measurements (SS: Screen Size) a (minimum) = 29.909 (1 3/16) . SS – 44.886 (1 13/16) b (maximum) = 48.239 (1 1/16) . SS – 44.869 (1 13/16) c = 8.0899 (11/32) . SS d = 5.5245 (7/32) . SS *VPL-AW15 only When using the 4:3 aspect ratio screen (projecting a 4:3 picture) Unit: mm (inches) Screen 40 60 70 80 100 120 140 160 180 200 size (inches) (mm) 1016 1524 1778 2032 2540 3048 3556 4064 4572 5080 a (minimum) 1419 (56) 2152 (84 3/4) 2518 (99 1/4) 2884 (113 5/8) 3616 (142 1/2) 4348 (171 1/4) 5080 (200 1/8) 5813 (228 7/8) 6545 (257 3/4) 7277 (286 5/8) b (maximum) 2317 (91 1/4) 3498 (137 3/4) 4088 (161) 4679 (184 1/4) 5860 (230 3/4) 7041 (277 1/4) 8221 (323 3/4) 9402 (370 1/4) 10583 (416 3/4) 11764 (463 1/4) *c 396 (15 5/8) 594 (23 1/2) 693 (27 3/8) 792 (31 1/4) 990 (39) 1188 (46 7/8) 1386 (54 5/8) 1584 (62 1/2) 1782 (70 1/4) 1980 (78) *d 270 (10 3/4) 406 (16) 473 (18 3/4) 541 (21 3/8) 676 (26 5/8) 811 (32) 947 (37 3/8) 1082 (4...
Otros modelos de este manual:Proyectores - VPL-AW10 (1.38 mb)