Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Proyectores - P1340WG (809.46 kb)
Proyectores - P1340WG (4.32 mb)
Proyectores - P1340WG (20.1 kb)
Resumen del manual
Acer Projector Series Operation Guide Original Issue: 09/2010 Model number: __________________________________ Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ 3 The Acer projector you have bought has integrated DLP and NVIDIA 3D technology. Important: When you turn the 3D technology on, you will be shown a reminder that 3D is enabled. If you do not wish to view 3D content, you should turn it off, otherwise the image may not be projected at full brightness. Using NVIDIA 3D technology Before you can enjoy the benefits of the NVIDIA 3D technology, you will need to do the following. Ensure your graphics card is supported. Please visit 3D_Vision_Requirements.html to see if your graphics card is listed. If you are unsure, there is an automatic tool at the top of the page that may help you. Important: Only NVIDIA graphics cards are supported. 2 Download and install the 3D drivers and 3D player from 3 You should also download a suitable 3D player such as the one available from Note: You may need to purchase additional software. 4 Ensure you have the NVIDIA 3D glasses and IR-transmitter. Setting up a 3D environment Once you have installed the drivers, you will need to set up the environment. 1 Position the infra-red transmitter so that it has maximum coverage. The transmitter controls the 3D glasses and is necessary to view 3D content. Plug the USB cable in to an available USB port on your computer. English 4 2 Right-click anywhere on the desktop and select NVIDIA Control Panel. This will open the setup Wizard if you haven’t previously set up the 3D environment. English 3 Follow the onscreen instructions to set up the 3D environment. 4 Check the Enable Stereoscopic option and select the correct display device. 5 Set the refresh rate to 120Hz from the appropriate drop-down menu. 6 Press the menu button on the projector remote control to open the OSD. Select the second menu option on the left-hand side of the window. 7 Set 3D to Nvidia 3D Vision. 5 Alternatively, press the Empowering Key on your projector’s remote control to open Acer eView Management. From the 3D options, select Nvidia 3D Vision. English Using the stereoscopic player You need to have a stereoscopic player in order to view 3D content. The instructions below explain how to view 3D content using the Stereoscopic player that is available at Other players may have different procedures. Open the stereoscopic player and set the viewing method by going to View > Viewing Method > NVIDIA 3D Vision. Open the 3D content in the player. Note: You need to view content at fullscreen resolution in order to get the 3D effects. EnglishEnglish 6 Using DLP 3D technology Before you can enjoy the benefits of the DLP 3D technology, you will need to do the following. 1 Ensure your graphics card supports 3D playbac...
Otros modelos de este manual:Proyectores - P1341W (1.08 mb)
Proyectores - PE-W30 (1.08 mb)
Proyectores - S5201B (1.08 mb)
Proyectores - S5201M (1.08 mb)