Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Choose the sub screen by clicking on the desired item on the tool bar in the upper part of the control interface The active sub screen is indicated with a blue spot 8.2.3 General What can be done ? Basic controlling, monitoring and general parameter setting of the projector can be done in this screen, image 8-4. • 3 buttons ON, STANDBY and PAUSE • The target information part gives the main characteristics of the projector • 2 buttons allow to switch between dual and the single lamp mode How to change the general settings? 1. Click on the lamp mode button to select the desired mode A blue spot indicates the active mode 2. Click on one of the three buttons to start up, pause or put in standby the projector A green led indicates the status of the projector. 8.2.4 The source selection screen What can be done ? • A source selection dialog box allows to visualize all the sources or only the detected sources. • 3 buttons to activate, freeze, pause and logo • selection of 12 different switching effects • selection of 3 different backgrounds: logo, Blue, Black R5976992 ICON H250/400 13/12/2006 8.Networkcentricoperations Image 8-5 The source selection screen How to select a source ? 1. Click on show all or show detected Depending on the option (show all/detected) selected, a list is displayed. In case show all is selected, a list of all possible sources is displayed, signal presence is indicated with an orange dot. When show detected is selected, all the detected sources are displayed with an orange dot. 2. Double click on the desired source The selected source is now projected In group mode there are only grey or green nodes, no orange (detected). On start up, a green node will be shown when all projectors are playing the same source type. Grey will be shown when some of the projectors are not showing the same source type. If we double click on a grey node, it should go green as long as at least one of the projectors in the group can show the source. 8.2.5 The PiP screen Following screenshots are taken for an iQPro projector. The layouts may be slightly different for an iCon (layout automatically adapted after projector type detection by the client). What can be done ? The PiP tool allows to manage the PiP of the projector in a more user friendly way: • a check box list allows to choose between 10 PiP layout (5 preset layouts and 5 personal layouts) • several buttons allow operations on windows (add, remove ) as well as on the PiP layouts (save, ...) • a graphical screen allows easy altering of the PiP layout : re sizing, positioning of the different windows. R5976992 ICONH250/400 13/12/2006 8.Networkcentricoperations Image 8-6 PiP screen How to perform operations on a PiP layout As an example, let us choose a personal (non preset) layout, add a window, reposition the windows, and save the layout under a different name. 1. Click on one of the check boxes to choose a layout Choose a personal layout Image 8-7 R5976992 ICON H250/400 13/12/2006 8.Networkcentricoperations The PiP screen (as well as the projected layout) is updated Image 8-8 This layout contains one window being an RGBHV Data source 2. Click on the Add window button Note: if the layout already contains 4 window, it will be impossible to add a new one. In that case a window is displayed, image 8-9 Image 8-9 A dialog box is displayed showing the possible sources to be added. Image 8-10 Add window dialog box 3. Select the source to be linked to the new window. R5976992 ICONH250/400 13/12/2006 8.Networkcentricoperations The window is added to the layout. Image 8-11 4. When entering the PiP screen the cursor is replaced by a hand, Click on the window to be repositioned. The window is surrounded by a white frame. 5. Drag the window to the desired position. 6. Place the cursor on one of the corners of the window to be re sized. A double arrow is displayed. 7. Drag to re size. Note: the window is re sized by keeping the same aspect ratio. Importing/exporting a layout Every PiP layout can be exported and saved as backup on the network or on the hard disk of the Client PC. It can then be imported at any time. How to import/export a layout ? 1. Click on the Export button. A dialog box is displayed. Image 8-12 2. Browse to the desired location and fill in the filename. How to import a layout ? 1. Click on the import button. R5976992 ICON H250/400 13/12/2006 8.Networkcentricoperations A dialog box is displayed. Image 8-13 2. Select the layout to be imported. For more information on Picture in Picture see the PiP chapter. 8.2.6 Image settings What can be done ? • General settings • Color temperature • Geometry General image settings 1. Click on Image settings menu in the tool bar to drop down the submenu Image 8-14 2. Click on General 3. Slide the cursors to set the corresponding value Image 8-15 R5976992 ICONH250/400 13/12/2006 8.Networkcentricoperations Use the checkbox to define a coarse or a fine setting. Click on the Filmmode button to enable or disable the filmmo...
Otros modelos de este manual:Proyectores - ICON H250/400 R9010510 (7.89 mb)