Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Projector Settings
Network settings screen
Press the [MENU] button.
NETWORK
1
NETWORK
LAN1
The menu screen appears.
HOSTNAME
PROJECTOR
WEB CONTROL
OFF ON
WEB STANDBY
OFF ON
WEB PASSWORD
Use the [ ] buttons to display
MAC ADDRESS
00 : 0B : 97 : 41 : 00 : 00
2 the Network Settings screen, then
press the [ENTER] button.
SELECT : [ ] [ ]
ENTER : [ENTER]
Use the [ ] buttons to select a
ESC : [MENU]
3 parameter, then change its setting.
Parameter
Description
Select this parameter and press the [ENTER] button in order to
NETWORK
set DHCP, IP address, subnet mask, and gateway settings.
(See the next page for detailed information.)
1. Select this parameter and press the [ENTER] button in order
to set the name of the projector in the network.
HOSTNAME
2. Use the [ ] buttons to select alphanumeric characters
(up to 16 characters), then press the [ENTER] button.
3. Select [OK], then press the [ENTER] button.
Use the [ ] buttons to toggle web control ON/OFF.
WEB
ON: Enables control through a web browser.
CONTROL
OFF: Disables control through a web browser.
Use the [ ] buttons to toggle web standby ON/OFF.
ON: During standby, the lamp in the projector can be turned on
WEB
through web browser controls.
STANDBY
OFF: During standby, the lamp in the projector cannot be turned
on through web browser controls.
The default setting is “panasonic” (all lower case). Use the
following procedure to change the password. This procedure
sets the password which is entered on page 6.
1. Select this parameter to set the password to be entered when
WEB
the projector is accessed through a web browser, then press
PASSWORD
the [ENTER] button.
2. Use the [ ] buttons to select alphanumeric characters
(up to 16 characters), then press the [ENTER] button.
3. Select [OK], then press the [ENTER] button.
A MAC address (Media Access Control Address) which is unique
MAC
to the network equipment is displayed here. The MAC address
ADDRESS
may be needed when, for example, a DHCP server is used.
4
...