Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
These settings files can be saved to the camera memory card and loaded into the camera using the Load settings file? option in the camera wireless setup menu, sparing the user the necessity of entering settings one by one in the camera menus. The main steps involved in creating settings files and loading them into the camera are as follows: 1 33114422Start the WT/WTA ConfiguratorStart the WT/WTA Configurator Adjust settingsAdjust settings Savesettings tothe memory cardSave settings to the memory card Load settings into the cameraLoad settings into the camera The camera menus shown in this guide are those displayed when a WT-2 wireless transmitter is connected to a D2X digital camera. The steps described for loading set- tings files are the same for other Nikon cameras and transmitters. Consult the manuals for the camera, wireless transmitter, and other wireless network devices for details. Note: Start the WT / WTA Configurator Double-click the WT/ WTA Configurator icon. 1 The Configurator window will open. . Device: Edit settings for the WT-1 or WT-2. . “Wireless”: View or edit wireless network settings. . “TCP / IP”: View or edit TCP / IP settings. . “FTP”: View or edit ftp settings. . Import…: Load saved settings. . Export…: Create a settings file. . Quit: Quit the WT/ WTA Configurator. To quit the WT/ WTA Configurator, click the Quit button. 2 Adjust Settings 2 When entering text in the Configurator window, use only the characters shown in the keyboard area of the illustration for “ Text Entry in the Network Settings Menu” on page 14 of the W T-1 User ’s Manual or page 26 of the W T-2 User’s Manual. Note: The “Wireless” Tab: Wireless Settings SSID: Enter the BSS- or ESS-ID for the wireless LAN adapter or access point. Communication mode: Choose from Infrastructure and Ad-hoc. • Infrastructure: Choose when connecting to the wireless network via an access point. The channel is set automatically and can not be selected from the Channel menu. • Ad-hoc: Choose for direct peer-to-peer connection to a host. When using an ad-hoc connection, select a Channel that matches that used by the wireless LAN adapter. Use encryption (WEP): To enable encryption, check this option and select the type of encryption (ASCII, Base 16, or TKIP), then enter the encryption key in the WEP key text box. ASCII and TKIP keys use standard letters and numbers, while base-16 (hexadecimal) keys use only the numbers 0–9 and the letters “A–F”. The length of ASCII and base-16 keys depends on the type of encryption used: 5 ASCII or 13 hexadecimal characters are required for 40- and 64-bit encryption, 10 ASCII or 26 hexadecimal characters for 128-bit encryption. TKIP keys are available only with the WT-2 and may be 8 to 64 characters long. If Shared key is selected, the WT-1 will enabl...