Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Hardware installation Please install your phone as the connection chart above shows. 3. Setting up the phone 3.1 Obtaining IP address First of all, you should obtain the IP address of the phone. After you connect the phone with your local network, it will get an IP address automatically by DHCP (server assigned). Press MENU button and up/down to select the ‘Network’ menu and press ENTER, then press up/down to select the Status menu, then press ENTER. You will see L for LAN port IP and W for WAN port IP. The default LAN port IP is 192.168.123.1. 3.2 Use the web based programming page After getting the correct IP, open an Internet Explorer browser on the PC which is connected with the same network as the phone (Please ask your network administrator how to set your PC). Then put the IP address in the Web page. At the end of IP address, please add the port number “:9999”, for example: and press Enter. You will see the login screen. The default account and password are For admin user: Account: root Password: test For normal user: (With this account you can not set some parameters, e.g. SIP domain) Account: user Password: test 3.3 Network Settings Click the menu Network->WLAN Settings and Network->LAN Settings to set the network parameters. Please consult your ISP or network administrator about it. DHCP is the default network type. Your phone will get the required network parameters such as IP and subnet mask automatically. -1 If your network uses static IP, you should set local IP, subnet mask, gateway IP, DNS1 and DNS2 first. If your network uses PPPoE, you should set the PPP password first. 3.4 Set time and SNTP server Click the menu Phone Setting->SNTP Settings to set your SNTP server and time zone. Note: If your service provider has pre-programmed some settings such as Primary Server, Secondary Server, Time Zone, Synchronic Time, and so on, you will not need to program these items. 3.5 SIP Settings After you have the IP setting completed as above, you should set following parameters which are required to log in SIP Server: Display Name, User Name, Register Name, Register Password, Domain Server, Proxy Server, SIP Port, RTP Port, DTMF setting. 3.6 Save Settings and Reboot Simply click the Save button and quit the browser after the Configure OK screen appears, and then click the Reboot button. 3.7 Normal Operation After the phone reboots, it will show the time and the account information. 3.8 Use Keypad to set this device Note: Before you set SIP Setting, you need to get authority in the menu Administrator->System Authority. You should input roots password here. The input keys: Key Name Description 1 “1”, “-“, “.. ”, “!”, “?” 2 “2”, “a”, “b”, “c”, “A”, “B”, “C” 3 “3”, “d”, “e”, ”f”, “D”, “E”, “F” 4 “4”, “g”, “h”, “I”, “G”, “H”, “I” 5 “5”, “j”, “k”, “l”, “J”, “K”, “L” 6 “6”, “m”, “n”, “o”, “M”, “N”, “O” 7 “7”, “p”, “q”, “r”, “s”, “P”, “Q”, “R”, ‘S” 8 “8”, “t”, “u”, “v”, “T”, “U”, “V” 9 “9”, “w”, “x”, “y”, “z”, “W”, “X”, “Y”, “Z” 0 “0”, “space” * “*”, “•”, “:”, “@” # Start dialing process MENU This is the “Menu” key to set the IP Phone UP/DOWN This is Up.. / Down.. key and volume setting when hook off. Incoming calls/dial calls when ready. FWD Call forward CONF 3-way conference ENTER This is “ENTER”, accept setting DEL This is “Delete”, Delete word or phone number HOLD This is “HOLD” function CONTACTS This is “CONTACTS”, Phone Book FLASH This is “FLASH” function RD This is “RD” the same number again SPK This the Speaker Phone -2 4 Phone Functions Phone Functions EN 4.1 Making Calls over the Internet User can call another VoIP phone or any PSTN telephone through the Internet by simply dialling the destination number as you would do with any other phone. Please note that there are dialling patterns required and areas you are allowed to dial may vary. Please consult your service provider. 4.2 Receiving Calls over the Internet When there is a call, answer it as you would do on any regular phone. 4.3 Speaker Press SPEAKER on the phone to have a hands free call, press SPEAKER again to hang up or pick up the handset to make a normal call. 4.4 Date and Time display After you set the SNTP (synchronized to the Internet) or phones date and time, date and time will show on the screen. 4.5 Call Duration display The numbers will show on the screen. 4.6 Work as router/bridge This phone can work as a family router/bridge, you can set it on the web: Network->WAN Settings. Please select the type of the network you want to use. Note: It is recommended to use the phone as a secondary router. 4.7 Volume Adjust In WEB page: Phone Setting-> Volume Settings. You can also use the keypad to change volume of speaker or hand set by Up/Down keys. 4.8 Phone book By WEB page: Phone Book->Phone Book, you can set the phone list. Using the phone: press MENU then use up/down to select the ‘Phone Book’ , press ENTER and use up/down to select the ‘Add entry’, then press ENTER to add a contact to the list. After you set the...
Otros modelos de este manual:Teléfonos fijos - CMP-VOIP60 (367.33 kb)