Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
3. When the service answers, press . Any additional numbers you dial are sent as tone signals. Illustration, * 4. The phone automatically resets to pulse dialing when you hang up. 15 43-999.fm Page 16 Tuesday, August 17, 1999 8:28 AM CALLER ID OPERATION If you subscribe to Caller ID service, the phone company sends information about the call, as well as the time and date, between the first and second rings of every call you receive. The System 999 displays this information when it receives a call, and it stores up to 50 Caller ID records for later review. It also shows if the name or number were unavailable or blocked by the caller (see “Caller ID Messages” on Page 21). When a call comes in, ___ appears on the display, then the Caller ID record appears. If the phone’s Caller ID memory becomes full, any new call replaces the oldest call record. REVIEWING CALLER ID RECORDS When you have new Caller ID records (ones you have not reviewed), ___ appears. To review Caller ID records, repeatedly press to see the older records or to see the newer. Illustration, CID record example (?) 16 Notes: • If there is no call record in memory, the display shows, “NO CALLER ID”. • If you wait more than 30 seconds between keypresses while reviewing Caller ID records, the telephone automatically returns to the time display. DIALING FROM A CALLER ID RECORD To dial a local number stored in a Caller ID record, recall the record, then lift the handset and press DIAL BACK. Illustration, DIAL BACK 43-999.fm Page 17 Tuesday, August 17, 1999 8:28 AM Caller ID Messages Display Description ERASE Appears if you select to delete a caller ID record. ERASE ALL Appears if you select to delete all caller ID records. ERROR Appears if all caller ID information was garbled. Minor electri- cal disturbances can affect Caller ID information. Occasional errors are normal. If this happens often, contact your local telephone company and ask them to correct the problem, END OF LIST Appears when you reach the end of the information while reviewing stored information. MESSAGE WAIT- ING Flashes if you subscribe to a message waiting service and a message is waiting. MSG WAITING OFF Appears when you hang up call about 30 seconds after checking the message by the message waiting service. NO CALLER ID Appears if there is no Caller ID information stored in the sys- tem’s memory. OUT OF AREA Appears if the Caller is not within a Caller ID service area, or during the following types of incoming calls. PRIVATE Appears (if available) if the caller chose to block sending Caller ID information. No Caller information appears. # Shows the number of a stored call. NEW Flashes during a new incoming call, and appears at the first time you review a Call’s information. A new call is an incom- ing call where the caller’s number and name (if available) is not already stored in the system’s Caller ID memory. ADJUST CON- TRAST Appears while you adjust the display’s contrast for the best readability. 17 43-999.fm Page 18 Tuesday, August 17, 1999 8:28 AM STORING VIP CALLS If you receive a call from an important caller (someone you call frequently, for example), the System 999 lets you store that caller’s call record as a VIP call. The System 999 lets you know you have a VIP call by sounding an alert tone. You can also call back a VIP number with the touch of a button. The System 999 lets you store up to 10 call records as VIP calls, and review and delete the marks at any time. Follow these steps to store a VIP call: 1. To store a VIP number, recall the desired Caller ID record, then press VIP. Illustration, VIP To call back a VIP number, press VIP. Press or until you see the desired VIP number, then lift the handset and press DIAL. DELETING CALLER ID RECORDS You can delete a single Caller ID record, or you can delete all records at once. To delete a single Caller ID record while it is on the display, press ERASE until “ERASE CALL ID?” appears. The phone beeps twice. Illustration, ERASE To delete all Caller ID records, follow these steps. 1. Press or to enter the records you want to delete. 2. Hold down ERASE until “ERASE ALL?” appears. 3. Press ERASE. The phone beeps twice. Note: The VIP call record will not be deleted when you delete all records. 18 43-999.fm Page 19 Tuesday, August 17, 1999 8:28 AM TROUBLESHOOTING We do not expect you to have any problems with your telephone, but if you do, the following suggestions might help. Problem Suggestion No dial tone. Check that the phone line and handset cords are securely connected. Display is blank. Batteries are weak or not installed and AC adapter is not connected. appears. AC power is interrupted. Be sure AC adapter is correctly and securely connected. Volume drops or you hear unusual sounds. Someone has picked up another phone on the same line. Hang up the other phone. Call is noisy. Check that the phone line and handset cords are securely connected. Hang up and redial the number. Phone dials 1+area code+num- ber when dialing a l...