Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
THD+N: <0.02% Dynamic Range: 100 dB (non A-weighted) Crosstalk <-91 dB re 20 dBu @ 20 kHz channel to channel Auto Mixer Parameters Number of Open Microphones (NOM) PA Adaptive Mode First Mic Priority Mode Last Mic Mode Maximum # of Mics Mode Ambient Level Gate Threshold Adjust Off Attenuation Adjust Hold Time Decay Rate Matrix Mixing Parameters 12 analog in/out 18 expansion bus in/out 8 assignable processing blocks in/out 4 assignable fader blocks in/out 1 10W speaker amplifier 1 telco input/1 telco output Assignable Processing Blocks Filters All pass Low pass High pass Low shelving High shelving Parametric EQ Notch CD Horn Crossovers Bessel Butterworth Linkwitz-Riley Compressor Delay; adjustable up to 250 ms Assignable Fader Blocks Gain/Mute Microphone Input Configuration Input Gain Adjust Mic or Line Level Phantom Power on/off Echo Cancellation on/off Noise Cancellation on/off Filters All Pass Low Pass High Pass Notch PEQ Mute on/off Chairman Override on/off AGC on/off Automatic Level Control on/off Auto Gate/Manual gate Adaptive Ambient on/off Pre-AEC channel Mic/Line Inputs 1-8 Push-on mini-terminal block, balanced, bridging Impedance: < 5 K. Nominal Level: adjustable -56 dBu to 0 dBu (7 dB step coarse gain adjustment) Maximum Level: -65 dBu to +20 dBu Echo Cancellation: 130 ms tail time (works with 12 dB of room gain) Line Inputs 9-12 Push-on mini-terminal block, balanced, bridging Impedance: < 5 K. Nominal Level: 0 dBu Maximum Level: 20 dBu Outputs 1-12 Push-on mini-terminal block, balanced Impedance: < 50 . Nominal Level: 0 dBu Maximum Level: 20 dBu Amplifier Output Binding Post Connection 10 Watts @ 4 . Impedance THD + Noise: < 0.5% Telco Line Port RJ-11 POTS (plain old telephone service) or analog PBX extension A-lead supervision provided Telco Set Port Pass-though RJ-11 analog jack Telephone Audio Performance Conditions: Unless otherwise specified, all measurements are performed with Transmit Limiter and Receive ALC disabled Frequency Response: 250Hz to 3.3 kHz ±1dB THD+N: <0.3% re-max level 250 Hz to 3.3 kHz SNR: > 62 dB re-max level Telco Line Echo Cancellation Tail Time: 31 ms Null: 55 dB nominal Telephone Noise Cancellation Noise Cancellation 6-15 dB attenuation Expansion Bus In/Out Proprietary Network RJ-45 (2), 1.9 Mbps CAT-5 twisted-pair cable, 200’ maximum cable length Ethernet Autoswitching with Quality of Connection (QoC) 10/100 Mbps Ethernet Network Port 10/100 Mbps Ethernet PC Port RJ-45 Connectors RS-232 Serial Command Protocol Only (Console software not supported on RS- 232 port) DB-9 female 9,600/19,200/38,400/57,600/115,200 baud rate; 8 bits, 1 stop bit, no parity Hardware flow control on (default)/off Control/Status Ports DB-25 female A/B (2) Inputs A/B: active low (pull to ground) Outputs A/B: open collector, 40 VDC max, 40 mA each +3.3 VDC pins (2) (300 mA over-current protected) USB Version 2.0 compatible Type: B-connector Configuration & Admin Software Converge™ Console Power Input Range Auto-Adjusting 100–240 VAC; 50/60 Hz Power Consumption 30 W Typical Dimensions (L x D x H) 17.25” x 10.25” x 1.75” 43.8 x 26 x 4.5 cm Weight 7.5 lbs/3.3375 kg unit weight 12 lbs/5.4kg shipping weight Operating Temperature 14° F/-10° C to 122° F/50° C ambient unit temperature Approvals See the Installation & Operation Manual for complete details AES48-2005: AES standard on interconnections — Grounding and EMC practices — Shields of connectors in audio equipment containing active circuitry (self certified) Optional Accessories Converge Pro 880 Converge Pro 880TA Converge Pro 840T Converge Pro 8i Converge Pro TH20 Converge SR 1212 Converge SR 1212A Tabletop Controller Part Number 910-151-881 Converge Pro 880T 8-Channel AEC Microphone Mixer with Telephone Hybrid and 10W Amplifier > CLEARONE LOCATIONS Headquarters: Latin America EMEA APAC Salt Lake City, UT USA Tel: 801-974-3621 Tel: 44 (0) 1189 036 053 Tel: 801-303-3388 5225 Wiley Post Way global@clearone.com global@clearone.com global@clearone.com Suite 500 Salt Lake City, UT 84116 Tel:...