Votos - 5, Puntuación media: 4.6
(
)
)
|
Resumen del manual
down. of the unit) (Ex: “LOW” is selected.) (1-B) Telephone Line Cord Wall Phone DIALING MODE Plate Selector (on the bottom of the unit (1-B) DIALING HANDSET MODE VOLUME (PAUSE) Button Selector Selector(3-A, 4-A, 5-C) • When set to OFF, the unit will not ring. RINGER Selector (FLASH) Button (5-A) (on the bottom of 5 Set the HANDSET VOLUME selector to HIGH, the unit) (1-B) (REDIAL) Button (2-A) MEDIUM or LOW. Handset (Ex: “MEDIUM” is selected.) Accessories (included) Handset....................................one PLEASE READ BEFORE USE AND SAVE. RINGER Handset Cord...........................one Selector Panasonic World Wide Web address: Telephone Line Cord................one Handset Cord for customers in the USA or Puerto Rico • To order accessories, call 1-800-332-5368. To temporarily set the handset down during a conversation, place it as shown here. 5 Special One-4 One-6 When finished, hang up. • To store other number repeat • If a pause is required for dialing, (PAUSE) where needed. Pressing (PAUSE) counts as one digit (5-C). 4-A Storing Phone You can store a number ( (DIRECT) or (EMERGENCY) ). Do not press any one-touch auto dial buttons prevent misoperation. It is recommended that you program emergency number in the (EMERGENCY) button. 1 Lift the handset. 2 Press (PROGRAM) . 3 Enter a phone number up to 16 digits. • If you misdial, hang up and start again from step 1. 4 Press (PROGRAM) . 5 Press a one-touch auto dial button ( (DIRECT) or (EMERGENCY) ). one-touch auto dial button ( (DIRECT) or (EMERGENCY) ). Phone number (up to 16 digits) Hang up. Lift the handset During a conversation, press (PROGRAM) twice To store a dialed number in memory (During a conversation) To erase a stored number Lift the handset press (PROGRAM) (PAUSE) (PROGRAM)one-touch auto dial buttons ( (DIRECT) or (EMERGENCY) ). Hang up. 4-B Dialing a Stored Number 1 Lift the handset. 2 Press the one-touch auto dial button ( (DIRECT) or (EMERGENCY) ). • The stored number is dialed. • The (REDIAL) button does not work for one-touch dialer. To dial the number again, hang up and repeat steps 1 to 2. • If the telephone line cord is disconnected more than 3 days, the stored numbers may be erased. Store phone numbers again. 5-A For Call Waiting Service Press (FLASH) if you hear a call-waiting while talking. •The first call is put on hold and you second call. • To return to the first caller, press (FLASH) again. 5-B Temporary Tone Dialing(For Rotaty or Pulse ServiceUsers) Press (TONE) before entering access numbers which require tone dialing. • After a few seconds, the dialing mode changes to tone. You can enter numbers to access answering services, electronic banking services, etc. When you hang up, the dialing mode will return to pulse. 5-C How to Use Button (For Analog PBX Line/Long Distance Users) We recommend that you press (PAUSE) if a pause is required for dialing with access a long distance service. Ex. Line access number (9) (PBX) (9) (PAUSE) Phone number • Pressing (PAUSE) once creates a few seconds pause. This prevents misdialing when you redial or dial a stored number. • Pressing (PAUSE) more than once increases the length of the pause between numbers. 6 Things You Should Know 6-B Helpful Information 7 Referencia Rapida If you cannotsolve yourproblem • Call our customer call center at 1-800-211-PANA(7262). • Panasonic’s e-mail address for customer inquiries: consumerproducts@panasonic.com for customer in the USA or Puerto Rico ONLY RemedyProblem • Environment _ do not place the unit in room where the temperature is less than 5oC (41oF) or greater than 40oC (104oF). Allow 10 cm (4") clearance around the unit for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock or direct sunlight. • Routine care _ wipe the unit with a soft cloth. Do not use benzine, thinner, or any abrasive powder. For assistance, please call: 1-800-211-PANA(7262) 6-A Troubleshooting Problem Remedy The unit does • Check the settings (1-B). not work. The call cannot • Check whether the be connected DIALING MODE selector is even when youset correctly (1-B). dialed correctly. The unit does • The RINGER selector is set not ring. to OFF. Set to HIGH or LOW (1-B). You cannot store • Confirm the handset is off a phone number the cradle. in memory. • Do not enter a phone number longer than 16 digits, otherwise only the first 16 digits will be recorded and the previous registered number will be erased. You cannot redial • If the last number dialed by pressing was longer than 32 digits, the number will not be (REDIAL) . redialed. • If there is any trouble _ disconnect the unit from the telephone line and connect a known working phone. If the known working phone does not operate properly, consult your telephone company. For product service • Call 1-800-211-PANA(7262) or 1-800-833-9626 for the location of an authorized servicenter. • Panasonic’s e-mail address for customer inquiries: consumerproducts@panasonic.com for customer...