Votos - 70, Puntuación media: 4.3
(
)
)
|
Fotos y especificaciones Siemens Euroset 5020 |
Resumen del manual
i?1? Press the Set key, star key and Set key one after another. The calls list is deleted and closed. Delete individual entries 1...0 Scroll to the desired entry. f?? Press the Set key twice. The entry is deleted. Activating/deactivating display of the area code You can set the telephone so that the area code is not displayed for incoming calls. This can be useful, for example, if you cannot see the last digits of a long phone number on the display. You can deactivate the display for 2 area codes (up to 5 digits each). i?m Initiate function. If no number has been set in a storage location Z appears in the display. If both storage locations are in use, these are displayed side by side; the current storage location to be edited flashes. If necessary, use the ; key to toggle between the storage locations displayed to edit them as follows: Delete a number: f? Press the Set key. Enter a number: O Enter a one to five digit number. Enter another prefix: ; O Press the last number redial key, enter next prefix. ? Press the Set key. "You have a message" display Different network providers offer services for saving messages (e.g. voice mail services). If one or more newly received messages have been stored with the network provider, it may inform you via your telephone. In the display, this notification from the network provider is displayed with the flashing H symbol and the phone number. You can now dial the corresponding phone number in order to check the stored messages. If there are no more new messages for you, the H symbol disappears. Using the repertory keys as "function keys" Different public telephone services/functions - possibly by order/request - can be selected via predetermined key combinations which you can obtain from your network provider. You can save the necessary key combinations like normal phone numbers on repertory keys and similarly "select" and also deactivate the service again. Note: If you activate the symbol display and save the function calls on the 2nd level of the repertory keys, you can link the activation and deactivation of different services for each "function key" with the display or hiding of certain symbols on the display. Therefore, when setting the repertory keys on the 2nd level, bear in mind that activating and deactivating the display symbols ™, k®, — ,4 and ^ is linked to very specific keys in the 2nd level - regardless of the phone numbers or function calls stored on it! Deactivating/activating the symbol display for additional services Displaying the symbols can be activated or deactivated as needed. In the default setting, the display is activated. ?im5 Initiate function. 0/1 0: deactivate; 1: activate. ? Press the Set key. Recommended assignment of symbols to keys When the symbol display (~= is activated and you then press one of the following repertory keys, the display symbol assigned to each is activated or deactivated respectively (key numbering from top to bottom): Assignment Display icon a 1 a 2 on Call forwarding immediately of : 3 a 4 on Call forwarding on no reply of a 5 a 6 on Call forwarding when busy of — a 7 a 8 on Call waiting of + 4 a 9 Anonymous call (only the next call) 8 Assigning/changing function keys f?^H Initiate function. ( 1 Press the function key (=repertory key) that is to be assigned. If the function key is already assigned, the key assignment appears in the display. If the memory for this function key is empty, Z appears in the display. O Enter the key combination/code for the desired service. Important! If a part of the key combination to be saved includes numbers/characters that must be changeable (e.g. a phone number for a forwarded call destination, or a time for the appointment reminder), the shift key (= must be used in this place. During a later activation of the service, this key makes the cursor for entering the changeable part flash. f? Press the Set key. Example: Call forwarding In the following, you will see an example of repertory keys used as "function keys". If the symbol display is activated, in the "call forwarding" example when the service is activated, the symbol provided for it is displayed, or hidden when the service is deactivated. The key sequence for activating the function "call forwarding immediately" from your network provider consists of e.g. three parts: Select function Forwarded call destination End of function 0200 Phone number of the forwarded call destination 0 You now have the following options: ♦ You can dial the entire key sequence each time on the keypad. ♦ You can save the key sequence on Repertory keys as an entire function together with the phone number of a set forwarded call destination or only the select function and the function end. With this, you still have the option to set a forwarded call destination that may change on a case-by-case basis. Saving call forwarding on a function key f?^H Initiate function. ( 1 Press the repertory ...
Otros modelos de este manual:Teléfonos fijos - Gigaset (1.13 mb)