Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• This step normally takes between 5 and 60 seconds. In extreme circumstances this step can take up to 15 minutes. 5 sec. 5 - 60 sec. 5-60 SEC. 2 x 6 EN English EN 7 Using the universal remote control 3 Keep buttons and pressed simultaneously for 5 seconds. • The red Setup light lights up. The remote control is now in setup mode. 4 Press and hold the button that does not function and immediately release it when the device responds. • If the button still does not function as expected, try pressing it again for a longer period of time. 5 Press the device selection button twice to save your settings and exit setup mode. • When no button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings. 3 Using the universal remote control 3.1 Buttons and functions The illustration on page 8 gives an overview of all buttons on the remote control. Try out the buttons you need for operating your devices. Notes • Buttons having the same functions as the buttons on your original remote control may have different namings on the SRP1103 (e.g. Info / Display). • Only functions that are available on your original remote control can be used for operating your devices with the SRP1103. 2.2.2 Improving buttons When correctly set up, the remote control should be able to operate all your devices. However, when using the remote control for the first time it might occur that some buttons do not yet function as expected. In this case you can have the remote control search for alternatives. Note Improving buttons is not possible when the code was found during full database search (with code ‘9, 9, 9, 9’). During initial setup 1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function. 2 Press the button that does not function, keep it pressed and immediately release it when the device responds. Repeat this for every button that does not function. • If the button still does not function as expected, try pressing it again for a longer period of time. After initial setup 1 Make sure the receiving device is able to respond. E.g. when you try to repair the Play button for your DVD player, make sure to insert a DVD into the DVD player otherwise the Play button is not able to function. 2 Select the device that you wish to operate (e.g. DVD). Press the device selection button to select DVD. 5 sec. 2 x 8 EN English EN 9 Using the universal remote control 1 ................................. selects available source inputs (antenna, cable, etc.). ..................................... setup light. Lights up when a remote control command is being sent, when you just selected a device and when the remote control is in setup mode. ................................. switches the selected device on / off. Note For some TV brands / types, the button will only turn off the TV. You will have to press a digit button (direct channel selection) to turn on the TV again. 2 ............... device selection buttons. Select the device to be operated. 3 GUIDE........................ electronic program guide. MENU......................... menu on / off. INFO........................... on-screen channel information. EXIT............................. exits / clears on-screen menu displays. 3 4 1 2................ cursor up, down, left, right in a menu. OK................................ confirms your selection. A, B, C, D................... context sensitivity buttons, ordered following the requirements for cable boxes. A - Yellow, B - Blue, C - Red, D - Green. 2 3 4 5 1 6 10 EN English EN 11 Using the universal remote control 3.2 Resetting a button to its original function If an improved button (see chapter 2.2.2) still does not function as expected, you can always reset the button to its original function. 1 In the current device mode, keep digit buttons and pressed simultaneously for 5 seconds, until the red Setup light lights up. • The remote control is now in setup mode. 2 Press digit buttons , and , in that order. • After each button press the red Setup light blinks once. 3 Press the button that you wish to reset twice. E.g. the 22 button. • After each button press the red Setup light blinks once. • The red Setup light will blink one more time to confirm that the button was succesfully reset to its original function. 4 + VOL -....................... adjusts TV volume. ................................. previous program / Last / Back. .................................. mutes TV sound. + CH -........................ next / previous channel. 5 5................................... rewind. 2..................................... play. 6................................... fast forward. 9..................................... stop. 0.................................... record. ;...................................... pause. 4P 3P......................... previous (4...