Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Inser ting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9 Adjusting device selection (Mode keys) . . . . . . . . . . . . . . . . . . . . . . . . . 8 Adding a function to the remote control . . . . . . . . . . . . . . . . . . . . . . . . 8 Restoring the original functions of your remote control . . . . . . . . . . . . 9 5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 60-73 1. Introduction Congratulations on your purchase of the Philips SRU520 universal remote control. After installing the remote control you can operate a maximum of 2 different devices with it: TV and VCR/DVD players/recorders. You can find information about how to prepare this remote control for use in the chapter ‘Installing the remote control’. 2. Installing the remote control Inserting the batteries 1 Press the cover inwards and slide it in the direction of the arrow. 2 Place two AAA type batteries into the battery compar tment, as shown. 3 Slide the cover back and click it firmly into place. Note: If the mode keys (TV and DVD/VCR) blink four times after ever y key press, the remote control is indicating that its batteries are running low. Replace the old batteries with two new AAA batteries. Testing the remote control The remote control has been programmed to operate most Philips devices. Because the SRU520 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your device responds to the SRU520. The example below (TV) instructs you how to do this. You can repeat the same steps for other devices (VCR/DVD players/recorders) which you want to operate using the SRU520. Example of TV: 1 Turn your TV on manually or use the original remote control. Tune to channel 1. 2 Press the TV key to select TV. Press the key until it lights up. – If the key does not light up, check whether the batteries are properly inser ted (see ‘Inser ting the batteries’). 4 Instructions for use 3 Check whether all the keys are working. For an overview of the keys and their functions see ‘3. Keys and functions’. – If the TV responds as it should to all of the key commands the SRU520 is ready for use. • If the device does not respond at all or not to all of the key commands, follow the instructions under ‘Setting the remote control’, or for online setup go to: Setting the remote control This is only necessar y if your device does not respond to the SRU520. If that is the case, the SRU520 does not recognize the brand and/or model of your device and you need to program the remote control to do so. The example below (TV) instructs you how to do this. You can repeat the same steps for other devices (VCR/DVD players/recorders) which you want to operate using the SRU520. You can set the remote control either automatically or manually. Automatically setting the remote control The remote control will now automatically search for the right code for your device. Example of TV: 1 Make sure the TV is switched on and select a channel using the original remote control or the keys on the TV (for example channel 1). The SRU520 emits the ‘switch off TV’ signal for all models of TV that are stored in the memor y. • If the device is a DVD-player or video recorder, inser t a disk or tape and star t playback. 2 Press the TV key to select TV. Press the key until it lights up. Then keep keys 1 and 3 on the SRU520 pressed simultaneously for three seconds, until the key flashes twice and then remains lit. Press and hold the Standby key of the SRU520. – The SRU520 now star ts emitting all known ‘TV off’ signals, one by one. Each time a code is sent, the TV key lights up. English 5 5 When your TV switches off (stand-by), release the Standby key of the SRU520 immediately. – The SRU520 has now found a code that works on your TV. 6 Check if you can operate all functions on your TV with the SRU520. • If this is not the case, you can redo the automatic setting. The SRU520 will then search for a code that works better. – After the SRU520 has run through all the known codes, the search will stop automatically and the TV button stops f...