Iniciar sesión:
Votos - 2, Puntuación media: 4 ( )

Manual de usuario Sanitaire, modelo SC6090 Series

Fabricar: Sanitaire
Tamaño del archivo: 588.81 kb
Nombre del archivo: ee43b345-dbce-44fc-ac9e-4cff8d0fdc49.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


• Close T-handle on the waste valve to continue cleaning. Clean and Store NOTE: Turn off the power switch and unplug electrical cord before cleaning tank. • Empty tank of all liquid and thoroughly rinse inside before storing. • Clean and dry tank and all accessories. • Store indoors in a cool, dry area. OPTIONAL EXTRACTOR WAND ACCESSORY KITS ASSEMBLY Attach Vacuum Hose Coupling • Disconnect hose from hose inlet. • Push the accessory hose coupling into the hose inlet. • Give a slight twist to secure. Attach Solution Hose Fitting • Make sure the quick disconnects snap together firmly. As you do this, always inspect hoses for cracks, fraying or leaks. Do not use if hoses are damaged. Begin Cleaning • Turn on the vacuum switch and the pump switch. With the cleaning nozzle and hose in hand you may begin cleaning. By pulling the solution trigger, you will disperse the solution onto the desired area. Because the vacuum is on, the fluid will quickly be sucked back into the cleaning nozzle. You will notice that the area you have just cleaned will be damp. This is normal. Model SC80 15' Accessory Hose with 12" Single Jet Nozzle Model SC81 8' Accessory Hose with 3" Metal Nozzle 4 SANITAIRE COMMERCIAL EQUIPMENT LIMITED WARRANTY Carpet and Spot Cleaners (Excludes Vacuums) Your equipment, which has been manufactured, tested and inspected with carefully specified engineering requirements, is warranted to be free from defects in material and workmanship. This Limited Warranty is, however, subject to the following qualifications, conditions and limitations which are set forth to provide you and all users of the equipment with information concerning the duration, extent, availability and applicability of the Limited Warranty, the procedure to be taken to obtain its performance, and other information concerning the Limited Warranty policy. The Limited Warranty is extended to original end user as follows: One year parts replacement and 1 year service labor warranty. This Limited Warranty will not cover damage attributable to the following: (1) Improper, unreasonable or negligent use or abuse of the equipment. (2) Abrasions or punctures of the equipment. The start date of the Limited Warranty coverage shall be the purchase date of the original end user or six months from the date the machine was shipped from the Factory, whichever comes first. PARTS OF EQUIPMENT NOT COVERED BY THE LIMITED WARRANTY Certain parts of equipment require replacement in the ordinary course of use due to normal wear by reason of their characteristics. Normal wear items such as gaskets, wheels, cords, hoses, switches, filters, bearings, carbon brushes, solenoids, o-rings, thermostats, electrical terminals and casters are excluded from the Limited Warranty. EXCEPTIONS AND EXCLUSIONS FROM THE LIMITED WARRANTY This equipment is required to be used on electric current as indicated on the data plate. Otherwise damage, defects, malfunctions or other failure of the equipment arising from use on electric current not as indicated are excepted and excluded from this Limited Warranty. Defects, malfunctions, failure or damage of the equipment caused by improper, unreasonable or neglectful use or abuse while in possession of the purchaser are likewise excluded from this warranty. If repair is done on your equipment by anyone other than those designated as an authorized Warranty Center, THE MANUFACTURER at its sole option, may determine that this warranty will not apply and the reimbursement for such repair will not be made. PROCEDURE TO BE TAKEN TO OBTAIN PERFORMANCE OF LIMITED WARRANTY REPAIR To secure repair of the equipment or any warranted parts under this Limited Warranty, the following procedure should be taken. The inoperative equipment or warranted parts, together with satisfactory evidence of the purchase date, must be delivered, with shipping and delivery charges prepaid, to one of the following: 1) The dealer from whom purchased; 2) Any authorized service station. If you are unable to locate any of the foregoing, you may write or otherwise communicate to THE MANUFACTURER before repair service is performed by anyone else. In such event, THE MANUFACTURER will provide either the location of a closely available authorized distributor service department, or authorized warranty station or other factory instructions. Upon compliance with the above procedure, all warranted defects will be repaired, at no additional charge or costs to the customer, and the repaired product returned to the customer. All shipping charges will be the responsibility of the product owner. In following the procedures set forth, PLEASE MAKE CERTAIN to state the model, type and serial number as shown on the data plate of the equipment. REPLACEMENT In the event of a defect, malfunction or failure of your equipment or any warranted part to conform with this warranty, THE MANUFACTURER may, at its sole option and own expense, replace the equipment or any warranted part with another new identi...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría