Votos - , Puntuación media:
(
)
)
Fabricar: Shark
Tamaño del archivo: 651.99 kb
Nombre del archivo: S3250W_11-S3250W3_11_IB_ENG_100930.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
Fill the flask with water and use the funnel to pour it into the tank. Keep the water level under the “MAX” fill line. (fig. 3) 3 Replace the water tank cap and turn it clockwise to the locked position. S3250W_11-S3250W3_11_IB_ENG_100930.indd 5 10-09-30 10:28 AM Using Your Light & Easy™ Steam Mop When you use your steam mop for the first time or if you have not used the unit in awhile, it may take a minute or two for the water to travel through the pump and into the heater to create steam. Get it started by pumping the handle a few times. If you have waited a few minutes and you still do not see any steam, reference the troubleshooting section on page 11. fig. 1 fig. 2 fig. 3 IMPORTANT: Your steam mop needs water to make steam! Never use your steam mop without water in the tank. Sweep or vacuum your floors prior to cleaning with your Light & Easy™ Steam Mop. Visit for other great quick cleaning products to complement your Light & Easy™ Steam Mop, such as the Shark® SV800 Cordless Stick Vac. 1 Pull and twist the quick release cord holder to unwrap the power cord completely. (fig. 1) Plug into a 120-volt electrical outlet. (fig. 2) The “On” light will turn blue. If the light does not turn on, reference the troubleshooting section on page 11. (fig. 3) S3250W_11-S3250W3_11_IB_ENG_100930.indd 6 10-09-30 10:28 AM fig. 4 fig. 5 If your Light & Easy™ Steam Mop stops steaming, it could be out of water. Unplug the power cord from the electrical outlet and refill the water tank at anytime. If your Light & Easy™ Steam Mop stops steaming, it could be out of water. Unplug the power cord from the electrical outlet and refill the water tank at anytime. 2 Wait 30 seconds for the boiler to 3 Mop with a forward and backward heat the water. Pump the handle motion to customize steam output a few times to prime the pump, automatically. (fig. 5) activate steam and moisten the micro-fiber pad. (fig. 4) S3250W_11-S3250W3_11_IB_ENG_100930.indd 7 10-09-30 10:28 AM Using Your Light & Easy™ Steam Mop 1 Clean under furniture and tight areas using the Shark® Backsaver™ locking handle. Press the handle release button and apply slight pressure to bend the handle. The Shark® Backsaver™ joint will lock at a perfect, access-maximizing angle. (fig. 1) 2 Press the release button on the handle again to straighten. fig. 1 S3250W_11-S3250W3_11_IB_ENG_100930.indd 8 10-09-30 10:28 AM English Care of Your Light & Easy™ Steam Mop fig.2 fig.3 fig. 1 AFTER USE AND STORAGE 1 When you have finished using the Light & Easy™ Steam Mop, unplug the cord from the outlet and place the mop into the upright position (fig. 1) and let the unit cool 2-3 minutes. Release steam by pumping the handle several times. 2 Carefully separate micro-fiber cleaning pad from steam mop, avoiding contact with the hot pocket or dirt. (fig. 2) 3 Empty the water tank before storage. Remove the water tank cap and empty the tank over a sink. Replace the water cap. 4 To store the cooled Shark® Light & Easy™ Steam Mop, hang on a large hook. (fig. 3) NOTE: If you want to store the Light & Easy™ Steam Mop standing upright, make sure it is leaning against a wall for added support and safety. Always store your Shark® Light & Easy™ Steam Mop with the micro-fiber cleaning pad removed. Store away from children and high traffic areas. S3250W_11-S3250W3_11_IB_ENG_100930.indd 9 10-09-30 10:28 AM Care of Your Light & Easy™ Steam Mop fig. 5 fig. 6 CARE OF YOUR MICRO-FIBER CLEANING PAD 1 Wash pads in warm water. Wash separately from other laundry. Only use liquid detergent (no powder detergent). Do not use fabric softeners. Line dry or dry on a low dryer setting. (fig. 5) 2 If there are loose threads on the pad carefully cut the threads with scissors. Do not pull on them or cut at the base. (fig. 6) IMPORTANT: The micro-fiber cleaning pad may be very hot from the steam. Use caution when removing. Let the unit cool for 2-3 minutes. ORDERING REPLACEMENT PARTS To order additional parts and accessories, feel free to contact us at or call 1-800-798-7398. NOTE: Some parts may be available at your local retailer. Contact customer service for any other servicing. S3250W_11-S3250W3_11_IB_ENG_100930.indd 10 10-09-30 10:28 AM English Trouble Shooting PROBLEM POSSIBLE REASONS & SOLUTIONS The Light & Easy™ Steam Mop will not turn-on. Your steam-mop should be securely plugged into a 120V AC electrical outlet only. Check your fuse or breaker. If your unit still does not work, call 1-800-798-7398. Light & Easy™ Steam Mop will not make steam. Is there water in the water tank? If not, add water to your Steam Mop following instructions on page 5. Light & Easy™ Steam Mop leaves water on the floor. Is your micro-fiber cleaning pad too wet? Unplug your Steam Mop and change the micro-fiber cleaning pad. Light & Easy™ Steam Mop left white spot on the floor. Do not leave your steam-mop on the floor with a damp or wet cleaning pad. Do you have hard water? If you do, you might want to switc...