Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
It provides important information on the safety, use and maintenance of the appliance. Keep the operating instructions in a safe place and pass them on to any subsequent owners. Protecting the environment Do not simply throw away packaging material and old appliances. Equipment packaging: ■ The cardboard packaging can be deposited at a waste paper recycling point. ■ Deposit the recyclable polyethylene (PE) bag at a PE recycling point. Recycling the appliance at the end of its life: ■ The plastic components all carry a material identification marking so that, like the other materials, they can be recycled at the end of the life of the appliance. Please ask your local authority about your local recycling centre. Safety instructions f ^This appliance complies with the V vfollowing EC directives: - 73/23/EC dated 21. 02. 1973 - Low Voltage Directive -89/336/EEC dated 03. 05. 1989 (including Amending Directive 92/31/EEC) - EMC Directive. ■ Only connect the appliance to - 220/230 Volt - alternating current. ■ The mains circuit for the socket used must be protected with a fuse with a rating of at least 10 A. ■ Never remove the mains plug from the socket by pulling on the cable. ■ Do not use the appliance if: - the cable is damaged. - the housing shows visible signs of damage. ■ Avoid running over the mains lead with the appliance or the vacuum brush. The insulation could be damaged. ■ The cover cannot be closed unless a paper filter has been inserted. Please do not use force! ■ Always ensure that a paper filter as well as a MICROFILTER and a HEPA filter are inserted. ■ Toner dust from laser printers and copiers must not be vacuumed using normal household vacuum cleaners. ■ This is a domestic vacuum cleaner and should only be used to vacuum dry dust. People and animals must not be vacuumed using the appliance. Keep children away from electrical appliances. ■ The manufacturer is not liable for any damage caused by incorrect use or operation. ■ Leave wet shampooed carpets to dry completely. Otherwise the vacuum cleaner will be damaged. Such action might also reduce protection against electric shock. ■ Do not vacuum matches, glowing ashes or cigarette ends using the appliance. Avoid picking up hard, pointed objects as these may damage the appliance or the paper filter. ■ Do not expose the appliance to the effects of the weather, humidity or sources of heat. ■ Should the mains lead be defective, the complete cable roller must be replaced by AEG customer service or an authorised repair centre. ■ Repairs to electrical appliances may only be carried out by qualified specialists. Improperly effected repairs may result in significant risk to the user. ■ For this reason, if there is a malfunction in your appliance please contact your specialist dealer or AEG customer service directly. Preparing the vacuum cleaner for use The accessories can be connected by pushing and twisting, and can be disconnected by pulling them apart and twisting. Connecting the suction hose and suction tube. Join the suction hose handle firmly to the suction tube. 9 Using the nozzles Connecting the suction tubes Join the two tubes. model) Attaching the suction hose Insert the suction hose connector in the suction inlet. It locks in place and can be rotated all the way around. Press the release button and pull out the connector in order to remove the suction hose. Mains connection/Cable rewind The mains cable is in the cable compartment. Pull out the cable and insert the plug into the mains socket. Remove plug from the mains socket. Press the foot button; the cable rewinds automatically when vacuuming has been completed. Using the floor nozzle* For the daily care of carpets and hard floors. Without being changed over manually, the floor nozzle is entirely suited for daily vacuuming of carpets and hard floor surfaces such as parquet, tiles, linoleum, etc. Using the floor nozzle* For the daily care of carpets and hard floors. The floor nozzle may be changed over manually. The brushes can be extended for smooth floors and retracted for carpets. Crevice and upholstery nozzle stored in the appliance For specific cleaning requirements, two additional parts are included with the vacuum cleaner in an integrated accessories compartment*. Open the compartment by pressing gently as shown in the figure. The nozzles may be attached to the suction tube or the handle on the suction hose, depending on requirements. 10 Crevice nozzle For vacuuming crevices, gaps and corners. Upholstery nozzle For vacuum cleaning all upholstered furniture, mattresses, etc. The thread lifting strips on the nozzle even pick up thread and lint. Switching on Switching on and off [7^J]You can switch the appliance on and off vl/ by pressing the On/Off button. Power adjustment: Power adjustment - Rotary control* The suction power can be varied to suit individual vacuuming requirements using the electronic power adjuster. Maintena...