Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
(23) - If you stretch the elbow tube, it is returned to its position. Using the cleaning head and Accessory Nozzles Fit the large cleaning head onto the end of the tube. • The 2 position head (6) is equipped with a pedal (7) which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquet floors...). slide on the lever to lower the brush. Carpet or rug position. slide on the lever to lift brush up. Turbine brush nozzle - Air adjustment(20) Slide the air control lever to the right for long type carpet and to the left for short type carpet. - Cleaning turbine brush nozzle(21) Press the button on the rear side of the nozzle to separate the air cover. Use the dusting brush & crevice tool to vacuum clean the brush and fan. • This device (24) is used with the suction hole for device protection mounted. For the suction hole for device protection, its front, side and upper side is enclosed with a soft material in order to prevent damage of the device. Connect the suction hole for device 4 protection to the extension pipe for length adjustment. Remove dusts accumulated where the floor surface of the suction hole for device protection is dirty. • Crevice Tool (8) For vacuuming in those normally inaccess- ible places i.e. reaching cobwebs, or down the side of a sofa! • Upholstery Nozzle (9) For vacuuming upholstery, mattresses, etc. The thread collectors help to pick up the threads and fluff. • Dusting brush (10) For vacuuming picture frames furniture outlines, books and other uneven objects. How to plug in and use Pull out the mains lead to the desired length and plug into the socket. Adjusting the power level • Electronic power control (11) Suction capacity increases steplessly up to MAX. String the cleaner When you have switched off and unplugged the appliance, press on the button (19) to automatically rewind the cord.(depending on model) • Use storage clip as shown when storing the cleaner (12) Changing the dust bag The dustbag needs changing when the cleaner is set to maximum power and the cleaner head is off the floor but the “ bag full” indicator window (13) is completely coloured red. Even if the dustbag does not appear to be full at this stage, it should be changed. It could be that a great deal of very fine dust has clogged up the pores of the dust bag. • Turn off the appliance and unplug it. • Remove hose. • Open the cover (14) Your appliance is equipped with either a paper dust bag or a fabric dust bag (15) • Push the lever forwards in the direction of the arrow (16), and pull off the full paper filter bag towards the rear. Remove the bag and throw it away. • Insert the new paper filter bag into the unit with the arrow pointing downwards (17) If your appliance is fitted with a dust bag, empty it and replace it. Note: as the appliance is fitted with a safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted c...
Otros modelos de este manual:Aspiradoras - V-C424*** (2.07 mb)
Aspiradoras - V-C426*** (2.07 mb)