Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
. For indoor use only. Register your product at 1 1ASSEMBLING THE CLEANER Features may vary according to model. Ў For storage, park the floor nozzle. OPTION 2OPERATING YOUR CLEANER 2-1 POWER CORD NOTE When removing the plug from the socket, please take care to grasp the plug, not the cord in order to avoid undue stress. 2-2 ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward. 2-3 POWER CONTROL (VARIABLE CONTROL TYPE ONLY) The vacuuming power can be adjusted to suit any situation with the electrical power control. MIN = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. -To adjust power output just turn it right or left. 2 3 2-4 USING FLOOR TOOLS 3CHECK FILTER INDICATOR When the light is illuminated, check the Cassette Filter and clean it. OPTIONAL (Dust Bag type) Check the Dust bag and change it. - Cut off pet hairs or threads surrounding brush by using scissors. - Transparent tube Carpets Bare floors OPTION OPTION CREVICE DUSTING UPHOLSTERY 4 4 MAINTAINING THE CASSETTE FILTER NOTE The cassette filter should be washed thoroughly as well as emptied if: • the CHECK FILTER indicator lights continuously • the suction power feels weaker than normal • the Turbo Brush (optional) is not working properly 1 2 3 6 5 4 7 8 9 4-1 EMPTYING THE CASSETTE FILTER(Optional) • Ensure completely dry before replacing. • Allow 12 hours for it to dry. • Brush the Filter media with water until the stuck fine dust is removed. 5 5CLEANING THE CYCLONE FILTER (Optional) - CLEANING THE INNER PART OF CYCLONE FILTER NOTE It is necessary to use Cyclone Filter while cleaning. 1 2 3 4 5 6 7 8 1 2 3 OPTIONAL . FOR CLOTH FILTER BAG After using, if the cloth bag is full of dust, clean the cloth filter bag and use it again. 4-2 CHANGING THE DUST BAG (Optional) VP-95B TYPE 6 6CLEANING THE INLET FILTER 7OUTLET FILTER 1 2 3 PROBLEM CAUSE REMEDY 0 - IF YOU HAVE A PROBLEM Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Remove the object and empty/wash cassette filter as required. Cord does not rewind fully. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push down the cord rewind button. Vacuum cleaner does not pick up dirt. Crack or hole in hose. Check hose and replace if required. NOTE : Do not allow the filter to become clogged as this may cause power reduction or may damage the motor. 1 2 IMPORTANT SAFEGUARDS 1. Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner. 2. WARNING: Do not use the vacuum cleaner when rug or floor ...
Otros modelos de este manual:Aspiradoras - SC7030 (1.04 mb)
Aspiradoras - SC7033 (1.04 mb)
Aspiradoras - SC7043 (1.04 mb)