Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
NOTE :When removing the power cord from the electrical outlet, grasp the plug, not the cord. ON / OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch with your toe. POWER CONTROL(VARIABLE CONTROL TYPE ONLY ) The vacuuming power can be adjusted to suit any situation with the electrical power control. M I N = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. GB-3 VC-6000-EN 4/24/01 9:05 AM Page 7 D U S T-FULL INDICATO R If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. NOTE :If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. USING THE ACCESSORIES CREVICE DUSTING Crevice tool for radiators, Dusting brush for furni-Before use, assemble the crevice, corners, between ture, shelves, books, etc. dusting brush to the cushions. crevice tool. TOOL STO R A G E Your cleaner features a tool storage device. Assemble the accessory hanger on to the extension tube. It can be used to store the cleaning tools while they are not in use. This tool can be separated into two parts. USING THE BLOWER Located on the left rear side of the cleaner. 1) Disconnect the hose from the body of the cleaner. 2) Connect the hose clamper to the blow hole. GB-4 VC-6000-EN 4/24/01 9:05 AM Page 8 PARK POSITION Located in the top rear side of the vacuum-cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning. T R A N S P O RTING AND STORING THE VACUUM CLEANER For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position. REPLACING THE DUST BAG 1) To open the dust cover of the dust 2) Remove the carrying bag from the bagcompartment, press the clamper cleaner. upward. (The clamper is located at the front of the dust cover) GB-5 VC-6000-EN 4/24/01 9:05 AM Page 9 3) After removing the used dust bag, 4) Press the dust cover down gently insert the cardboard bag collar of the until the clamper relocks. new dust bag into the carrying bag. NOTE :Used dust bag can be sealed by removing the film from the paper and sticking the latter over the suction opening. (ONLY PAPER BAG) FOR CLOTH FILTER BAG After using, if the cloth filter bag is full of dust, clean the cloth filter bag and use it again. MAINTENANCE OR REPLACEMENT OF THE FILT E R S 1) INLET-FILTER. • Open the dust cover. • After detaching the filter, wash it lightly with- water, dry it in the shade, and then insert it in its original position. •Close the dust cover. 2) OUTLET-FILTER. •To open the filter cover, press front and pull it simultaneously. •Remove and replace the dirty microfilter. •Close the cover. GB-6 VC-6000-EN 4/24/01 9:05 AM Page 10 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure tha...
Otros modelos de este manual:Aspiradoras - VC-6012 (190.56 kb)
Aspiradoras - VC-6014 (190.56 kb)
Aspiradoras - VC-6014V (190.56 kb)
Aspiradoras - VC-6015V (190.56 kb)