Votos - 0, Puntuación media: 0 ( )

Fabricar: Bosch Tamaño del archivo: 7.93 mb Nombre del archivo: Idioma del manual:

Especially suitable for picking up pet hair. The brush roller is driven by the air flow through the vacuum cleaner. No separate electrical connection is needed. Setting up Version A . Engage the handle in the suction hose/telescopic tube. To remove the handle, press the notch button and pull the handle out of the suction hose/telescopic tube. Turn the locking ring on the vacuum cleaner to position and insert the suction hose/telescopic tube in the opening. . Lock the suction hose/telescopic tube in place by turning the ring to position . To remove the suction hose / telescopic tube, move the ring back to position and pull out the suction hose/telescopic tube. Connect the floor tool to the vacuum cleaner. Version B Turn the locking ring on the vacuum cleaner to position and insert the handle in the opening. Lock the handle in place by turning the ring to position . To remove the handle, move the ring back to position and pull out the handle. Fit the telescopic tube to the vacuum cleaner. Connect the floor tool to the telescopic tube. ELECTROMATIC® brush Your vacuum cleaner is equipped with an ELECTROMATIC® brush. For notes on use and maintenance, please refer to the accompanying instruction manual. Figure 1 Press the adjusting sleeve in the direction of the arrow and adjust the telescopic tube to the length required. Figure 2 Release the lower power cord hook by turning it and remove the cord from the upper power cord hook. Connect the plug to the mains socket. Figure 3 Turn the vacuum cleaner on/off at the switch. Figure 4 Adjust the suction setting by turning the rotary control. Vacuuming Figure 5 Adjusting the floor tool: . Rugs and carpets => Hard surfaces => Caution! Floor tools are subject to a certain amount of wear, depending on the type of hard floors you have (e.g. rough, rustic tiles). Therefore, you must check the underside of the floor tool at regular intervals. Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools. Vacuum using flexible tube Figure a) Switch off the vacuum cleaner. b) Press the rotary knob in the direction of the arrow to 6 release it and set it to the flexible tube position. c) Pull the hose adapter out of the holder in the direction of the arrow. Figure 7* Fit an accessory to either the flexible tube or the suction hose/telescopic tube. a) Crevice nozzle For cleaning crevices and corners. b) Upholstery nozzle For cleaning upholstered furniture, curtains, etc. Figure 8* Hard-floor brush For cleaning hard floor coverings (tiles, parquet flooring, etc.) Figure a) Switch off the vacuum cleaner. b) Insert the hose adapter back into the holder. c) Press the rotary knob to release it and turn it back to the 9 floor tool position. When the work is done Figure 10 Unplug the vacuum cleaner. Wind the cord around the power cord hooks at the rear of the vacuum cleaner....

Descargar ahora

Introduzca dos números de la imagen: