Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
WHEN RECHARGING, USE ONLY THE RECHARGEABLE BATTERIES SUPPLIED WITH YOUR TRANSCEIVER. USE OF OTHER BATTERIES WILL CAUSE DAMAGE TO YOUR FRS-1000 WEATHER RADIO TRANS CEIVER. OTHER TYPES OF BATTERIES MAY BURST CAUSING PERSONAL INJURY. AVOID INSTALLING THE FRS-1000 TRANSCEIVER IN AN AREA WHERE IT MAY BE SUBJECTED FOR PROLONGED PERIODS OF TIME TO DI RECT SUNLIGHT OR TEMPERATURES BELOW -4° F (-20° C) OR ABOVE 140 ° F (60° C). KEEP THE ANTENNA AT LEAST 1 INCH (2.5 cm) AWAY FROM YOUR HEAD AND BODY. DO NOT USE YOUR FRS-1000 RADIO TRANSCEIVER WITH A DAMAGED ANTENNA. Family Radio Service: The Family Radio Service (FRS) 2-way base (fixed) station “transceiver” (“transmitter and receiver”) radio has been designed for family and friends to keep in touch without the need for a license. It provides safety and convenience indoors for two-way radio operation between home base and other mobile FRS units, and operates on Family Radio Service designated frequencies. The FCC has established the license free, short -range two- way radio service for family and individual recreational use. The optimal range for this 2-way radio is approximately 2 miles in open areas; less in areas with buildings, dense foliage, and mountains. 2 Model FRS-1000 1 2 3 4 5 6 7 8 9 10 11 12 1. Battery CHARGE On/Off Switch 2. Liquid Crystal Display (LCD) 3. Alert (ALT) LED (Red) 4. Antenna (Retractable) 5. Transmit LED (Green) 6. Battery Door 7. Voice-Operated Transmission (VOX) Button 8. Weather/FRS Button 9. SCAN/Lock Button 10. Built-in Speaker 11. Built-in Microphone 13 14 15 16 17 18 19 20 21 12. CALL Button 13. DC12V Power Jack 14. Charging (CHG.) LED (Red) 15. Up/Down Channel/Volume Buttons 16. Weather Alert Button 17. MODE Button 18. LCD Backlight/Monitor (L/MON) Button 19. Power On/Off and Function Set Button 20. External Speaker(SPK)/Microphone (MIC) Jacks 21. Push-To-Talk (PTT) Button 3 4 Model FRS-1000 DISPLAY 1. Button (Key) Tone Beep On/Off Indicator: This icon appears when the beep key tone is on, and disappears when tone is not in use. 2. Key Lock Indicator: Icon appears when keypad is locked. This function disables keys such as channel up/down and MODE. 3. Monitor Indicator: Icon appears when the Monitor (L/MON) button is pressed and the channel monitor function is activated. 4. Signal Strength Indicator: Icon appears when a signal is being received. The icon consists of five bars to indicate the received signal level. The icon also represents transmit signal power when transmitting. 5. Continuous Tone Coded Squelch System (CTCSS) Indicator: Icon appears when the CTCSS tone function is active. 6. Large Segment Display: Indicates the FRS channel number in use. 7. Scan Indicator: This function allows the user to scan a channel and/or a tone code every .5 second to search for a valid signal. 8. Battery Level Indicator: Icon indicates the battery charge level. 9. HI/LO Indicators: Appropriate icon appears when the transmit power is set to desired output power. 12 11 10 13 14 7 8 6 4 5 3 2 1 9 10. Weather Mode Indicator: Icon appears steady when weather mode is active; it flashes when weather alert is active in the FRS mode. 11. Roger Beep Tone Indicator: Icon appears when the roger beep tone is enabled, signifying transmission has been terminated. Icon disappears when tone is disabled. 12. Small Segment Display: Displays the CTCSS tone option for a given channel from (01-38). 13. Dual Watch Mode Indicator: Icon appears when dual watch mode is active. 14. Voice Activated Transmission (VOX) Indicator: This function allows hands-free conversation. The icon appears when the VOX mode is activated. Powering the transceiver: The primary power source for Your FRS-1000 base station is the AC wall adapter. The FRS-1000 is also supplied with a battery back-up, should you experience loss of household current. The FRS-1000 will automatically switch to battery back-up when AC power is interrupted. The rechargeable batteries, Part Number FRSRBAT, are charged in the radio transceiver using the AC power adapter, which is also supplied with the unit. Installing the Back-Up Batteries: The four AA batteries are installed in the compartment at the right rear of the transceiver; the compartment is fitted with a removable cover. Install the batteries as follows: 1. Press down with the thumb at the arrow, and slide the battery cover off the side of the unit. 2. Insert the four AA rechargable batteries, Part Number FRSRBAT, provided. (Alternate positive ends (+) as shown in battery compartment layout.) Replace the cover. 5 BATTERY INSTALLATION POLARITY + + - - BATTERY COMPARTMENT COVER BATTERY COMPARTMENT COVER ARROW The following guidelines will improve performance and provide longer operating times for the FRS-1000: 1. Do not mix old and new batteries. 2. Do not mix alkaline, standard (carbon-zinc) or rechargeable (Ni-MH)batteries. 3. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to the...