Iniciar sesión:
Votos - 3, Puntuación media: 4 ( )

Manual de usuario Oricom, modelo Secure 500

Fabricar: Oricom
Tamaño del archivo: 449.45 kb
Nombre del archivo: 80bcc071-931a-4f7b-ba2e-6bd9fb9a9a46.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


The alert sound when the temperature falls Timer Setting Set countdown timer The timer can be set to countdown from 1 minute to 99 hours 59 minutes. The TIMER icon [ ] is displayed along with the countdown time. Press [Menu] key and use [ ] or [ ] key to select "Timer", the display is shown below: Timer 1. Press [ ] key, "Countdown" is shown on the display. Press [ ] key. 2. Press [ ] or [ ]. "Set Time" is shown on the display. 3. Press [ ], then use [ ] or [ ] key to set the hour. 4. Press [ ], then use [ ] or [ ] key to set the minutes. Start or cancel countdown 1. In the Timer setting menu, ]. 2. "Countdown" is shown ]. 3. "Timer On?" or Press [ ]. MENU SETTINGS MENU SETTINGS 21 Activate count up timer The timer can count up from 1 second to 99 hours 59 minutes. The TIMER icon [ ] is displayed along with the countup time. 1. In the Timer setting menu, Press [ ]. 2. Use [ ] or [ ] key to select "Count up". Press [ ]. 3. "Timer On?" is shown on the display, Press [ ] to confirm. Start, Stop and Reset the count up timer Parent Unit When count up is activated, 1. When it stops and displays 00:00:00, press [ ] to start, it will count from 00:00:00; 2. When it is counting, press [ ] to stop. Counted time is displayed steadily; 3. When it stops and displays a [ ] to reset it to 00:00:00; 4. Press [ ] again to restart it. Cancel count up 1. Press [Menu] and [ ] or [ ] key to select "Timer". Press [ ]. 2. Use [ ] or [ ] key to select ]. 3. "Timer Off?" is shown on the display, press [ ] to confirm. If countdown is currently running, the count up timer will not be available, and vice versa. Only one of the timers can be used at one time. Set clock This sets the clock on both units. 1. Press [Menu] and use [ ] or [ ] key to select "Timer". Press [ ]. 2. Use [ ] or [ ] key to select "Clock" and press [ ]. 3. "Set Time" is shown on the display. Press [ ]. 4. Press [ ] or [ ] to set the time then press [ ] to confirm. 5. If you set the time format to 12 hour, you AM or FM. Press [ ] or [ ] to set AM/PM for 12 hours then press [ ]. Set 12 or 24 hour Format Time format menu is available 1. Press [Menu] and use [ ] or [ ] key to select "Timer". Press [ ]. 2. Use [ ] or [ ] key to select "Clock" ]. 3. Use [ ] or [ ] key to select "Format" ]. 4. Press [ ] or [ ] to select 12 ]. 22 MENU SETTINGS 22 MENU SETTINGS Vibrate Alert Setting Vibrate alert is only available on the Parent Unit. You can turn on/off the vibrate alert through the menu. 1. Press [Menu], and use[ ] or [ ] key to select "Vibrate". The display is shown below: Vibrate 2. Press [ ], "Vibrate On?" or "Vibrate Off?" is shown on the display. 3. Press [ ] to confirm. TROUBLESHOOTING TROUBLESHOOTING 23 Problem The red Power lights do not light on when you plug in. The green Link light on the Parent Unit is fl ashing and cannot hear the sounds from your baby's room. Can't hear your baby on the Parent Unit but the is still glowing steadily. The Red Power light is flashing on the Parent Unit. A high pitched ear piercing noise units (feedback). Talk back feature is Possible cause(s) 1. Check if the units are properly connected to the power supply. 2. Check if the power is turned on. If not, Press [ ] to turn on the power. 1. You may have moved out of range . move closer to the Baby Unit and wait 5 seconds for the Link to establish. 2. You may need to re. establish the Link between the two units. Turn both units off by pressing and holding the [ ] and then turn on again by pressing the [ ]. Check if the volume is turned up on the Parent Check if the rechargeable batteries are the Parent Unit on the Charger Pod Check if the Parent and Baby Move them further apart. Check that the volume 24 PRODUCT SPECIFICATIONS 24 PRODUCT SPECIFICATIONS Feature Operating Frequency Range Power supply (Baby Unit/Parent Unit) Non rechargeable batteries, baby unit (not included in the package contents) Transmitting power Re-chargeable batteries (Parent Unit) Operating time with charged battery Specifications 1.8 GHz Up to 300 m under optimum conditions. The range is reduced in buildings (up to 50 m) as a result of walls, doors etc. Input: 100-240 VAC 50-60 Hz Output: 7.5 VDC, 500 mA, Type: AA, 1.5 V Alkaline Average: 10 mW Maximum: 250 mW Type: AA, 1.2 V, 1300 mAh NiMH Approx. 12 hours GUARANTEE GUARANTEE 25 Warranty (Australia) (a) Warranty Oricom International Pty Ltd (Oricom) warrants that the product is free from defects in materials and workmanship for a period of 12 months effective from the date of purchase. This warranty in no way affects your statutory warranty under the Trade Practices Act 1974 or any other similar legislation. It is important that you read the Warranty Card as it contains full and additional details of the warranty, limitation of warranty and conditions for receiving the warranty services during the warranty period. The Warranty Card is located in the package. (b) Exclusion and limitation of liability. Oricom will not be in breach of a warranty or condition expre...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría