Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
The T icon will be displayed at the top of the LCD screen. 3.5 Video ON/OFF Press V VIDEO ON/OFF key to turn the LCD display on or off, but will still leave the audio monitor on. 3.6 Temperature Display (HH .C / .F or LL .C / .F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29.C / 84.F or below 14.C / 57.F. The reading will change to HH .C / .F if the temperature goes above 36.C / 97.F. The reading will change to LL .C / .F if the temperature goes below 1.C / 34.F. ENGLISH Using the Baby Monitor MBP36 11 4. MBP36 Parent Unit Menu Options 4.1 Volume 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until * is highlighted. 3. Press the + UP button or - DOWN button to select the desired volume level from level 1 ~ 8. (The default volume level setting is level 4.) 4.2 Brightness 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until & is highlighted. 3. Press the + UP button or - DOWN button to select the desired brightness level from level 1 ~ 8. (The default brightness level setting is level 4.) 4.3 Lullaby 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until m is highlighted. 3. Press the + UP button or - DOWN button to select the desired song from the 5 lullabies available, or the cycle option to play all 5 songs in turn. If an individual song is selected it will only play once and then stop. (The default setting is lullaby OFF) 4. Press OK on the selected lullabies to select the desired song sound level. 4.4 Zoom 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > button until Z is highlighted. 3. Press the + UP button or - DOWN button to select the 1X or 2X Zoom. (The default setting is 1X.) 12 MBP36 Parent Unit Menu Options 4.5 Alarm 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until A is highlighted. 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, 2h). (The default setting is Alarm OFF.) If an alarm time is selected, the parent unit will beep for about 45 seconds after every 6, 4 or 2 hour period, and the alarm icon will flash red. 4.6 Camera Control 4.6.1 Add (pair) a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select ADD, and press the OK button to confirm. 4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching. 5. Press and hold the PAIR button underneath the baby unit until the parent unit finds the camera, beeps and the picture from the camera appears. NOTE A camera can only be registered to one parent unit at any one time. 4.6.2 View a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted and the del/add/view/scan menu pops up. 3. Press the + UP button or - DOWN button to select VIEW, and press the OK button to confirm. 4. CAM 1 / CAM 2 / CAM 3 / CAM 4 will pop up, press the + UP button or DOWN button to select desired CAM, and press the OK button to view the picture from that camera. ENGLISH MBP36 Parent Unit Menu Options 13 TIP Quick Method to View Cameras instead of entering into the menu bar. Directly press OK repeatedly to select CAM 1, CAM 2, CAM 3, CAM 4, SCAN. 4.6.3 Delete a camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select DEL, and press the OK button to confirm. 4. CAM 1/CAM 2/CAM 3/CAM 4 will pop up, press the + UP button or DOWN button to select the desired CAM, and press the OK button to delete that registration. 4.6.4 Scan camera 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the del/add/view/scan menu will pop up. 3. Press the + UP button or - DOWN button to select SCAN, and press the OK button to confirm. 4. The screen will then display images from different registered cameras in a loop of CAM 1/CAM 2/CAM 3/CAM 4, changing about every 12 seconds. TIP Quick Method to View Cameras instead of entering into the menu bar. Directly press OK repeatedly to select CAM 1, CAM 2, CAM 3, CAM 4, SCAN. 4.7 Temperature 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until t is highlighted. 3. Press the + UP button or - DOWN button to select .C or .F. 14 MBP36 Parent Unit Menu Options 5. Disposal of The Device(env...