Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 1.37 mb Nombre del archivo: Idioma del manual:

Baby unit B. Parent Unit A-1 TALK button B-1 POWER light A-2 POWER light B-2 DC 9V — ——< <<- --power supply A-3 TRANSMIT light jack A-4 DC 9V — ——< <<- --power supply B-3 ON/OFF switch / VOLUME jack control A-5 Microphone B-4 Loudspeaker A-6 Battery compartment cover B-5 Battery compartment cover A-7 CHANNEL selection switch B-6 Belt clip A-8 ON / OFF switch B-7 CHANNEL selection switch A-9 AC power adapter B-8 Battery door clip B-9 AC power adapter Safety instructions Please read this user manual carefully before using your baby monitor and keep it for future reference.This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such. • Make sure the baby unit and adapter cable are always out of reach of the baby (at least 1 meter / 3 feet away). • Never place the baby unit inside the baby’s bed or playpen. • Never use the baby monitor in moist places or close to water. • Except for the battery compartments, do not open the inside of the baby unit and parent unit in order to prevent electric shock. Getting your baby monitor ready for use Your baby monitor can be mains or battery operated. For getting the monitor ready for mains operated use, see the Quick Start Guide supplied. For getting the monitor ready for battery operated use, see below.When batteries are inserted, you’ll have an automatic back-up in case of mains failure. Parent unit 1 Remove the battery compartment cover. Press down the battery door clip (B-8) and and pull the cover (B-7) outward (fig. 1). 2 Insert four 1.5V AA batteries, noting the + and – configuration inside the battery compartment (fig. 2). Batteries are not included; we recommend Philips Alkaline batteries. 3 Put the battery compartment cover (B-7) back in place (fig. 3). Baby unit 1 Remove the battery compartment cover (A-6) using a small, flat screwdriver (fig. 4). 2 Insert four 1.5V AA batteries, noting the + and – configuration inside the battery compartment (fig. 5). Batteries are not included; we recommend Philips Alkaline batteries. 3 Put the battery compartment cover (A-6) back in place and tighten the screw (fig. 5). .Your baby monitor is now ready for battery operated use! Extra feature For basic monitoring, see the Quick Start Guide supplied. Talk function If your child gets older and doesn’t want to be heard continuously it can use the talk function. 1 Set the On / Off switch (A-8) on the baby unit to OFF (fig. 6). 2 Switch on the parent unit using the ON/OFF switch (B-3). Set volume level to 4-5 (fig. 7). 3 On the baby unit press and hold the TALK button (A-1) and talk clearly into the microphone (A-5) (fig. 8). Technical specifications Power supply Operating range -AC power adapter 230V AC, 50 Hz (2 included): output voltage 9V DC, 200mA. Only use the AC power adapter included or a type that complies with safety standard EN60950 with the following specification: 9 Volt DC/200mA. -Batteries: 4 x 1.5V,AA alkaline for Parent Unit (no...

Descargar ahora

Introduzca dos números de la imagen: