Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
2). Insert four non-rechargeable batteries (Fig. 3). Note: Make sure the + and - poles point in the right direction. 3 Reattach the lid and tighten the screw. Parent unit You can use the parent unit from the mains or on non-rechargeable batteries. Even if you are going to use the unit from the mains, we advise you to inser t the non-rechargeable batteries. This guarantees automatic back-up in case of mains failure. EngliSh Mains operation Put the appliance plug in the parent unit and put the adapter into a wall socket. The power-on light goes on. operation on non-rechargeable batteries The parent unit runs on four 1.5V R6 AA batteries (not included). We strongly advise you to use Philips LR6 PowerLife batteries. Do not use rechargeable batteries, as the parent unit does not have a charging function. Unplug the parent unit and make sure your hands and the unit are dry when you insert the non- rechargeable batteries. 1 2 Press down the latch of the battery compartment lid and remove it (Fig. 4). Insert four non-rechargeable batteries. Note: Make sure the + and - poles point in the right direction. 3 Replace the lid on the battery compartment (Fig. 5). Note: If the batteries are completely empty, the parent unit automatically switches off and loses contact with the baby unit. using the appliance Set the on/off switch of both the baby unit and the parent unit to ‘on’ (Fig. 6). Turn the volume control to switch on the parent unit and to set the volume to the level you prefer. (Fig. 7) Place the baby unit at least 1 metre/3 feet away from your baby. Place the parent unit within the operating range of the baby unit. Make sure it is at least 1 metre/3 feet away from the baby unit. For more information on the operating range, see section ‘Operating range’ below. Set the baby unit and the parent unit to the same channel. 1 2 3 4 5 It takes 10 to 30 seconds before a connection is established. The transmission frequency of channel A is 40.695 MHz. , The transmission frequency of channel B is 40.675 MHz. , 6 The baby unit and parent unit are now connected. operating range The operating range of the baby monitor is 150 metres/450 feet in open air. Depending on the surroundings and other disturbing factors, this range may be smaller. Dry materials Material thickness Loss of range Wood, plaster, cardboard, glass < 30cm/12in 0-10% (without metal, wires or lead) Brick, plywood Metal grids, bars < 30cm/12in Reinforced concrete < 30cm/12in < 1cm/0.4in 5-35% 30-100% 90-100% Metal or aluminium sheets < 1cm/0.4in 90-100% EngliSh For wet and moist materials, the range loss may be up to 100%. Features adjustable loudspeaker volume You can change the volume on the parent unit, so you can adjust to suit your surroundings. Turn the volume dial on the right side of the parent unit until the desired loudspeaker volume for the parent unit has been reached (Fig. 8). Note:Whilst operating on batteries, if the volume is set to a high level, the parent unit will consume more power. talk function Set the on/off switch of the baby unit to ‘off ’. Switch the parent unit on. Select a volume level of 4-5. When your child wants to talk to you, he or she only has to press the talk button on the baby unit and speak clearly into the microphone. The baby unit has a talk function that enables older children to talk through the baby unit to the parent unit. 1 2 3 Cleaning and maintenance Do not immerse the parent unit or the baby unit in water and do not clean them under the tap. Do not use cleaning spray or liquid cleaners. Unplug the baby unit or the parent unit if they are connected to the mains. Clean the parent unit and the baby unit with a damp cloth. Make sure the units are dry before you connect them to the mains. 1 2 3 Clean the adapters with a damp cloth. Storage When you are not going to use the baby monitor for some time, remove the non-rechargeable batteries from the baby unit and parent unit. Store the baby unit, the parent unit and the adapters in a cool and dr y place. replacement Baby unit Batteries Only replace the non-rechargeable batteries of the baby unit with four 1.5V R6 AA batteries. Note:We strongly advise you to use Philips non-rechargeable batteries. adapter Only replace the adapter of the baby unit with an adapter of the original type.You can order a new adapter from your dealer or a Philips ser vice centre: -TAD1-0900200E01 / SVH-005-090-020-A1 (EU/SGP only) -9VD200 (AU/NZ only) 10 EngliSh Parent unit Batteries Only replace the non-rechargeable batteries of the parent unit with four 1.5V R6 AA batteries. Note:We strongly advise you to use Philips non-rechargeable batteries. adapter Only replace the adapter of the parent unit with an adapter of the original type.You can order a new adapter from your dealer or a Philips ser vice centre: -TAD1-0900200E01 / SVH-005-090-020-A1 (EU/SGP only) -9VD200 (AU/NZ only) Environment -Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at a...