Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
This is your indication that the time display is incorrect and needs to be reset. Important: After you reset the time, be sure to reset your alarm settings as well. 5 CK5029_030405.p65 5 4/3/2005, 15:08 Power Source This radio is designed to operate on normal 120V 60Hz AC power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to an AC outlet that is always ‘live’. Do not connect it to an outlet that is controlled by a wall switch. When the power to the radio is interrupted, the Sure Alarm battery back up system takes over to maintain the time and alarm settings. To maximize the life of the back up battery, keep the radio connected to a ‘live’AC outlet at all times. This radio uses a polarized AC plug which has one blade wider than the other. This plug will only fit into a polarized AC outlet. This is a safety feature. If the plug will not fit, you may have an older non-polarized AC outlet. Do not defeat the safety feature by trying to file the wider blade, or replacing the plug. AC Outlet Contact an electrician to replace your AC Plug outdated outlet. 6 CK5029_030405.p65 6 4/3/2005, 15:08 Protect Your Furniture This model is equipped with non-skid rubber 'feet' to prevent the product from moving when you operate the controls. These 'feet' are made from non-migrating rubber material specially formulated to avoid leaving any marks or stains on your furniture. However certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To prevent any damage to your furniture we strongly recommend that you purchase small self-adhesive felt pads, available at hardware stores and home improvement centers everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the product on fine wooden furniture. 7 CK5029_030405.p65 7 4/3/2005, 15:08 8 1 3 4 6 7 8 10 11 12 13 Top Panel Front Panel Right Side Panel 16 14 12 15 17 13 11 9 2 18 LOCATION OF CONTROLS AND INDICATORS 5 CK5029_030405.p65 8 4/3/2005, 15:08 1.) MINUTE SET Button. 2.) CLOCK Setting Button. 3.) SLEEP Button. 4.) ALARM Setting/Reset Button. 5.) HOUR SET Button. 6.) OFF-ON-BUZZ-AUTO Selector Switch. 7.) AUTO ON Indicator. 8.) AC Power Cord. 9.) DIMMER HI(High)/LO(Low) Selector Switch (Back Cabinet). 10.) Speaker. 11.) VOLUME Control. 12.) BAND (FM/AM) Selector Switch. 13.) TUNING Control. 14.) SNOOZE/SLEEP OFF Button. 15.) AM indicator. 16.) Time Display. 17.) Dial Pointer. 18.) Back Up Battery Compartment (Bottom Cabinet). 9 CK5029_030405.p65 9 4/3/2005, 15:08 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Setting The Clock When you connect the radio to your AC outlet for the first time, the display will begin flashing “12:00” AM. The flashing will stop when you set the time. AM indicator 1.) Depress the CLOCK button together with the HOUR button to set the display to the correct Hour. 2.) Depress the CLOCK button together with the MINUTE button to set the display to the correct Minute. Note: Observe the AM indicator to make sure you have set the clock to the correct hour, AM or PM. If the AM indicator is ‘On’ the time displayed is AM. If the AM indicator is ‘Off’ the time displayed is PM. 10 CK5029_030405.p65 10 4/3/2005, 15:08 Setting The Wake Up Time 1.) Depress the ALARM button together with the HOUR button to set the display to the correct Hour. 2.) Depress the ALARM button together with the MINUTE button to set the display to the correct Minute. Note: Observe the AM indicator to make sure you have set the clock to the correct wake up hour, AM or PM. If the AM indicator is ‘On’ the time displayed is AM. If the AM indicator is ‘Off’ the time displayed is PM. Checking The Wake Up Time Whenever you want to check the wake up time, simply press the ALARM button. The display will change from correct time to wake up time. Release the ALARM button to return to correct time. 11 CK5029_030405.p65 11 4/3/2005, 15:08 Listening To The Radio Note: Set the clock before turning the radio ‘On’for the first time. 1.) Set the BAND selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Set the OFF-ON-BUZZ-AUTO selector switch to the “ON”position to turn the radio ‘On’. 4.) Select your desired station with the TUNING control. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, set the OFF-ON-BUZZ-AUTO selector switch to the “OFF”position to turn the radio ‘Off’. Antenna Information AM The AM bar antenna is inside the cabinet. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal. FM The FM antenna is built in to the AC power cord. If FM reception is weak try varying the position and direction of the power cord until you find the strongest signal. 12 CK5029_030405.p65 12 4/3/2005, 15:08 W...