Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Keep the rubber headphone jack cover in place when the unit is not in use. If the cabinet does become wet after jogging in the rain, wipe away any excess moisture with a soft dry towel before putting the radio away. SPORTS STYLE LIGHTWEIGHT STEREO HEADPHONES The lightweight stereo headphones supplied with this personal stereo radio have earpieces designed to fit directly into your ear. Be sure to observe the “L” (Left) and “R” (Right) markings on the earpieces to make sure that you put the headphones on correctly. Always set the VOLUME control to a low level before putting on the earphones, and then gradually increase the volume to a comfortable listening level. Headphone Jack VOLUME Control 7 HK2227BL_120203.p65 7 2/12/2003, 14:21 LOCK Switch The LOCK switch locks all of the other controls buttons. If you are carrying the radio in a backpack, handbag, gym bag, etc, set the LOCK switch to the ‘On’ position to prevent it from turning ‘On’ accidentally by something pressing against the POWER button. Likewise, once you start listening to the radio you can set the LOCK switch to the ‘On’ position to prevent you from accidentally pressing the POWER button again or the TUNING + / – or MEM. UP/DOWN buttons while you are carrying or jogging with the radio. Remember that to use any of the other controls the LOCK switch must be set to the ’Off’ position. LOCK Switch ALARMON/OFF 8 HK2227BL_120203.p65 8 2/12/2003, 14:21 SETTING THE CLOCK Note: The clock can be set with the radio ‘Off’. Or if the radio is ‘On’, press the MODE button once to the clock mode. 1.) Press the MODE button for at least two seconds. The time display begins to flash. 2.) While the display is flashing press the TUNING – /HOUR button to adjust the hour. Be sure to set correctly for AM or PM. 3.) Press the TUNING + /MIN button to adjust the minutes. 4.) When the display shows the correct time, press the MODE button once more or after 5 seconds, the display stops flashing and the clock begins to run. Note: The correct time will always appear on the display when the radio is ‘Off’. 9 HK2227BL_120203.p65 9 2/12/2003, 14:21 LISTENING TO RADIO BASS BOOST Button Press the BASS BOOST button for added Bass response. The BASS ON LED indicator lights. Press again to cancel Bass Boost and resume normal sound. The BASS ON LED indicator goes off. OPERATION 1.) Make sure that the LOCK button is in the ‘Off’ position. (The LOCK indicator does not appear in the display.) 2.) Press the POWER button to turn the radio ‘On’. An AM or FM Band frequency will appear in the display. 3.) If necessary press the BAND button to switch between AM, FM bands. The appropriate band indicator appears in the display to confirm your selection. 4.) Press the TUNING + or TUNING – buttons to select the desired station as follows: • Manual Tuning Repeatedly press the TUNING + or TUNING – buttons until the display shows the frequency of the desired radio station. • Automatic Tuning Depress and hold either the TUNING + or TUNING – button until the display begins to move then release the button. The tuner will search up or down until it finds the next strong station and stops on that station. Repeat this procedure until it stops on your desired station. If you tune to an FM Stereo station the ST indicator will appear in the display. 5.) Adjust the VOLUME and BASS BOOST controls as desired. 6.) When you are finished listening press the POWER button to turn the power ‘Off’. The display will return to the correct time of day. 10 HK2227BL_120203.p65 10 2/12/2003, 14:21 PRESETTING STATIONS IN THE TUNER MEMORY You may preset up to 20 of your favorite stations (10 FM, 10 AM) in the tuner memory for easy recall at any time. 1.) Tune to the first station that you wish to memorize. Example: FM 103.5 MHz. When the desired frequency appears in the display depress and hold the MEMORY button. The MEM indicator flashes in the dispaly. 2.) Within 5 seconds press the MEM UP or MEM DOWN buttons to select a desired preset memory number. Example: CH 7. 3.) Press the MEMORY button again to enter your station in the selected preset memory. 4.) Repeat steps 1 through 3, selecting a different station and a different preset memory number each time until you have entered up to 10 FM stations, then press the BAND button to switch band and follow the same procedure to enter up to 10 AM stations in the tuner memory. RECALLING PRESET STATIONS 1.) Press the POWER button to turn the radio ‘On’and press the BAND button to select the desired band. 2.) Press the MEM UP or MEM DOWN buttons to scroll through the preset numbers. 11 HK2227BL_120203.p65 11 2/12/2003, 14:21 CHANGING A PRESET STATION To change a preset station simply tune to the new station that you wish to memorize, press the MEMORY button, and then select the number of the memory you wish to change by pressing the MEM UP or MEM DOWN buttons. When the desired preset number appears in the display press the MEMORY button once more to enter the new station in the desi...