Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Hour .. Min • . Normal SETTING UP THE TIME ZONE There are 7 time zones programmed into your unit: Zone 1 : Atlantic time Zone 2 : Eastern time (factory preset) Zone 3 : Central time Zone 4 : Mountain time Zone 5 : Pacific time Zone 6 : Yukon time Zone 7 : Hawaiian time 1. In standby mode, press and hold the TIME ZONE BUTTON (#3) until the current time zone number shows and is flashing. 2. Press the ..BUTTON (#2) or the .. BUTTON (#6) to change to the time zone number, 1-7 as shown above that corresponds to your area. 3. Press the TIME SET BUTTON (#9) to confirm. DST - DAYLIGHT SAVING TIME The DST function allows you to add one hour to the current time (in Spring) and subtract an hour from the current time (in Fall), if DST is observed in your area. Press and hold DST BUTTON (#2) for 3 seconds to toggle the DST function on and off. A .. icon will appear in the top left corner of the display when adding an hour and the .. icon will go off when an hour is subtracted. CALENDAR AND TEMPERATURE DISPLAY Selecting Calendar and Temperature display in normal time or radio mode: ..• Press the TEMP BUTTON (#6) to display the ambient indoor temperature momentarily for 5 seconds. Note: The temperature display is default to display Celsius readings. To display Fahrenheit readings,press and hold the C/F BUTTON (#6) to change Fahrenheit. ..• Press the Y-M-D BUTTON (#2) to display the current Year momentarily (5 seconds). While the Year is displayed, press the Y-M-D BUTTON (#2) again to change to show the current Month and Date momentarily (5 seconds). SETTING UP THE ALARMS Setting up Alarm 1 and Alarm 2 in normal time or radio mode: 1. Press and hold the ALARM SET BUTTON (4) for 2 seconds to enter the alarm set mode. 2. Press the .. BUTTON (#2) or the ..BUTTON (#6) to increase or decrease the Hour (digits are flashing) setting. 3. Press the TIME SET BUTTON (#9) to confirm and cycle through other settings as follow. Normal .. ALARM1 Hour .. ALARM1 Minute .. Alarm Weekdays .. ALARM 2 Hour • ALARM 2 Minute • . Normal Note for Weekday Alarms: ..• 1 – 7 means alarm will sound from Monday to Sunday. ..• 1 – 6 means alarm will sound from Monday to Saturday only. ..• 1 – 5 means alarm will sound from Monday to Friday only. Changing the alarm output source: E-6 1. Press the ALARM 1 (#7) or ALARM 2 (8) BUTTON to select the Music option (..) for wake-toradio. 2. Press the same button again to change to the Alarm option (..) for wake-to-alarm. 3. Press the same button again to disable the corresponding ALARM 1 or 2. Turning Off the Alarm: The alarm or radio will sound for 30 minutes unless interrupted by pressing the corresponding ALARM 1 or ALARM 2 BUTTONS or ON/OFF BUTTON (#5). It will repeat the chosen alarm again at the same time on the following day according to the weekday alarm settings described above. SNOOZE FUNCTION When the preset alarm time is reached, the chosen alarm will sound. You can momentarily stop the alarm sound for 9 minutes by using the snooze function. ..• Press the SNOOZE BUTTON (#3) for a 9 minute snooze duration during beep or radio alarm. ..• During the Snooze delay, the alarm icon ..or .. will flash. ..• The Snooze function can be repeated within the alarm duration or 30 minutes from the original wake time. ..• If you set the DISPLAY DIMMER SWITCH (#12) to the Auto OFF Mode, the LED DISPLAY (#10) will turn off automatically after the snooze function is activated and then light again when the snooze duration has expired. LISTENING TO RADIO 1. Choose between AM and FM bands by using the BAND SELECTOR BUTTON (#1). 2. Press the ON/OFF BUTTON (#5) to turn radio on. 3. Rotate the TUNING CONTROL (#19) to your desired radio station according to the dial scale on the unit. 4. Rotate the VOLUME CONTROL (#18) to adjust to the desired output level. 5. To turn off the radio, press the ON/OFF BUTTON (#5). TIPS FOR BEST RECEPTION AM – The AM antenna is located inside the cabinet of the unit. If AM reception is weak, change the position of unit until the internal antenna picks up the strongest signal. FM – During FM reception, always keep the FM WIRE ANTENNA (#15) fully extended for best performance. However, if FM reception is weak, try repositioning the unit until you get the best reception. SLEEP TIMER OPERATIONS Setting sleep time while listening to radio: 1. Press the SLEEP BUTTON (#3) to activate the Sleep function. The default sleep time is 90 minutes and will flash for 5 seconds unless you change it. 2. Press the SLEEP BUTTON (#3) repeatedly to decrease the sleep time to 60, 30, 15 minutes or OFF. USING THE AUX IN TO LISTEN TO EXTERNAL AUDIO PLAYER You can playback your favorite music from your iPod or portable digital audio player using the Aux in function. 1. Connect the headphone jack of your external device to the AUX IN JACK (#17) located on the back of the unit using a stereo cord with a 3.5mm phone plug on either ends. (Note: the stereo cord is not included) 2. Press the ON/OFF BUTTON (#5) to turn on the rad...