Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
Pressing it again will change the SLEEP time to 15 minutes. The iBlaster Clock Radio has an independent VOLUME setting for SLEEP mode so you can adjust the sleeping volume without affecting the alarm volume. While in SLEEP mode, turn the VOLUME knob on the iBlaster Clock Radio or the VOL + or VOL -on the remote control to adjust the SLEEP volume. The SLEEP volume will remain at that level until you change the settings. If you’d like to stop listening to your iPod or radio during sleep mode, press the ALARM RESET/POWER OFF button on the iBlaster Clock Radio or the POWER ON/OFF button on the remote control. Figure 7: iPod Dock Adapter Compatibility Chart MINI THIN iPOD THICK iPOD NANO iPod Mini iPod 3 Gen (10-15 GB) iPod 3 Gen (30 GB) iPod Nano (1 GB) iPod 3 Gen (20 GB) iPod 4 Gen (20 GB) iPod Photo (20 GB) iPod 3 Gen (40 GB) iPod 4 Gen (40 GB) iPod Photo (40 GB) iPod Nano (2 GB) iPod Nano (4 GB) iPod Video (30 GB) iPod Photo (60 GB) iPod Video (60 GB) Installing your iPod Your iBlaster Clock Radio comes with five removable dock adapters to ensure your iPod fits properly in the docking station. To insert a dock adapter, first use the table to select the correct size for your iPod. Due to the release of newer iPod models, new dock adapters are subject to availability. Gently insert the iPod dock adapter insert into the docking station. 10 Carefully insert your iPod into the dock (See Figure 8). To remove your iPod from the iBlaster Clock Radio, carefully remove your iPod, then remove the dock adapter by pulling gently upwards. Figure 8: Installing your iPod ton on the iBlaster Clock Radio or the POWER ON/OFF button on the remote. Your iPod will continue to charge while docked in the iBlaster Clock Radio. Charging your iPod Your iPod will charge when it is docked in the iBlaster Clock Radio. PLEASE NOTE: iPod Shuffles and other non- docking iPod models will not turn the VOLUME knob clockwise. To change tracks, press the |<< or >>| button on the remote control or the iPod. To turn it OFF, press the ALARM RESET/POWER OFF but- Listening to your iPod After you've installed your iPod, press the PLAY button on the remote control or the iPod. To PAUSE, press the same button. The VOLUME knob is located on the left side of the unit. To increase the VOLUME, turn the VOLUME knob counter-clockwise. To decrease the VOLUME, charge. Listening to a non-docking iPod or other portable audio devices If you are using an iPod without a docking port, MP3 player or other portable audio device, you can still play it through the iBlaster Clock Radio via the LINE-IN jack. Before using the LINE-IN jack, 11 make sure an iPod is not docked placed up to 12 inches away in the iBlaster Clock Radio. from the unit for best reception. You can also rotate the AM Plug one end of the audio antenna loop to improve recep patch cord (included) into the tion. headphone or LINE-OUT jack on your device and the other end of To listen to the radio, first the patch cord into the iBlaster press the RADIO button on the Clock Radio LINE-IN jack, locat-iBlaster Clock Radio or on the ed on the back of the unit. remote control. The radio fre quency will appear on the top Press the iPod button on the right corner of the display. iBlaster Clock Radio (or PLAY/PAUSE button on the Press the AM/FM button on the remote). The AUX icon will iBlaster Clock Radio or on the appear, indicating AUX playing remote control to select AM or mode. FM radio stations. Turn on and play your device. Turn the SETTINGS knob on the iBlaster Clock Radio or the Use the VOLUME knob on the >> or << button on the remote left side of the unit to adjust the control to find your desired sta volume. tion. To turn OFF the unit, press the Turn the VOLUME knob on the ALARM RESET/POWER OFF but iBlaster Clock Radio or the ton (or the POWER ON/OFF but- VOL+ or VOL-buttons on the ton on the remote). Be sure to remote control to adjust the VOL- turn off your device as well. UME. To turn the radio OFF, press Listening to Radio the ALARM RESET/POWER OFF To listen to the radio, first button on the iBlaster Clock fully extend the FM antenna wire Radio or the POWER ON/OFF but- to improve reception. ton on the remote control. NOTE: Do not strip, alter or attach to other antennas. The AM antenna loop should be 12 Connecting your iBlaster You can connect your iBlaster Clock Radio to external Clock Radio to your television equipment by using the OUTPUT terminals You can connect the iBlaster on the back of the unit. Before Clock Radio to another line-connecting, be sure to set your level device, such as an amplifi-iPod video to television. The er or recording device through OUTPUT terminals output the the LINE-OUT jack located at the video and audio signals shown back of the unit. The VOLUME on the television. setting on the iBlaster Clock If your television has an Radio does not affect the line S-VIDEO INPUT terminal, connect level. Adjust the VOLUME your iBlaster Clock Radio to it. through the device you connect...
Otros modelos de este manual:Los receptores de radio - IBLASTER 187 (780.98 kb)