Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
(Display = T0) PRESET 1 = 10 min. (Display = T1) PRESET 2 = 20 min. (Display = T2) PRESET 3 = 30 min. (Display = T3) PRESET 4 = 40 min. (Display = T4) PRESET 5 = 50 min. (Display = T5) PRESET 6 = 70 min. (Display = T6) PRESET 7 = 80 min. (Display = T7) PRESET 8 = 90 min. (Display = T8) PRESET 9 = 100 min. (Display = T9) - 9 3. Press the button TIMER f once again to start the kitchen timer. In the display r a clock icon running in reverse and a cooking pot symbol appears. From 30 seconds before expiry of the time span an acoustic signal sounds every 5 seconds, repeating at shorter intervals the closer the set time approaches. When the time has expired a permanent signal is sounded. • Press the button TIMER f to terminate the acoustic signal. To go back to the time of day display press the button MODE/BASS g. Interrupting the kitchen timer. • To stop the kitchen timer, change back, if necessary, from radio operation to the kitchen timer mode by pressing the TIMER f button. • You can interrupt the kitchen timer by briefly pressing the button TIMER f. The time is halted, the indicator blinks for 15 seconds. After which the device returns to the previous mode. Then briefly press the button TIMER f to change over to the Timer modus. • Press the button TIMER f once again. The time then continues to run. Switching the kitchen timer off • To stop the kitchen timer hold down the TIMER f button until the clock symbol disappears and the kitchen radio displays the time of day or radio frequency again. Programming the kitchen timer You can programme frequently required times for the kitchen timer into the device so that you do not have to repeatedly enter them. 1. Press the button TIMER f. 2. Using the buttons UP./DOWN• u/y programme in the desired time. 3. Press the button MEMORY/ d. In the display r "T" blinks. 4. Now select with the PRESET +/— buttons the memory slot into which the new kitchen timer time shall be saved. This number is now shown to the right of “T“. The time previously saved there is thus overwritten. 5. Press again the MEMORY/ -button d, to finalise the saving. - 10 Setting alarm times (Alarms 1 and 2) You can programme two alarm times into your kitchen radio. Alarm function Symbol in the display r Acoustic signal Radio Switched off no symbol 1. In automatic mode, press the button VOL. —/ALARM SET 1 h (or VOL. +/ALARM SET 2 j). In the display r the last set alarm time and the symbol for the type of alarm are shown. 2. Press the buttons UP./DOWN• u/y to set the desired alarm time. 3. Press the button VOL. —/ALARM SET 1 h (or VOL. +/ ALARM SET 2 j) repeatedly until the desired alarm function (see the table above) is indicated in the display r. 4. Press the button A.O.T./SNOOZE s to set the weekdays on which you require the alarm function: You can choose between "workdays" (MON, TUE, WED, THU, FRI), "weekends" (SAT, SUN) and "every day" (MON, TUE, WED, THU, FRI, SAT, SUN). 5. If you hold the button A.O.T./SNOOZE s pressed down for 2 seconds, you can also, through repeated brief press ing of the A.O.T./SNOOZE s button, select a specific weekday (e.g. only WED). The selected setting is indicated in the display r. 6. To return back to the selection of “workdays“, “weekends“ or “every day“ hold down the button A.O.T./ SNOOZE s again for 2 seconds. 7. Press the button MODE/BASS g to save the settings and return to automatic modus. When the alarm signal sounds... • and the alarm function "Radio" has been selected, the radio plays for one hour at a pre-defined alarm volume. • and the alarm function "Signaltones" has been selected, the signal tone sounds for 10 minutes, with an increasing volume. • To switch off the alarm for approx. 9 minutes press the A.O.T./SNOOZE button s. - 11 • To halt it, press the button VOL. —/ALARM SET 1 h or VOL. +/ALARM SET 2 j. The Reminder function The device will remind you of the date that you have set with the remind function. In these cases, from 8:00 – 23:00 on that day, and at every full hour, the acoustic alarm sounds for 10 minutes. In addition, the SDA-panel in the display r blinks. To stop the reminder alarm, press any button. Radio operation For radio reception, completely unwind the wire aerial e and, with the radio switched on, determine the most favour- able positioning for it. Switching the radio on and off 1. Press the button ON/OFF t. In the display r the currently selected frequency is shown. 2. Press the button ON/OFF t once again to switch the radio off and return the appliance to the automatic modus. Manual station selection 1. Press the button UP• u to raise the frequency. 2. Press the button DOWN• y to lower the frequency. Automatic station search You can have the kitchen radio search for stations. The kitchen radio searches the frequency range until it finds a station. 1. Press and hold the button UP• u for two seconds: the kitchen radio searches for the station with the next highest frequency. 2. Press and hold the button DOWN• y for two seconds: the kitche...