2. According to your personal settings, follow step by step to your desired folder, then visit it and load your favourite program. FM Operation Mode 1. Press the MODE button repeatedly until appears. Or enter , rotate the Scroll knob to , and then press to confirm. 2. For initial use, it will start at the beginning of the FM frequency range (87.50MHz). Otherwise, the last FM station you listened to will be selected. 3. Rotate the Scroll knob to increase or decrease the frequency by 0.05MHz per step; • Note: For US version, the frequency is 0.10MHz per step. 4. For ‘auto-searching’ active stations, simply press the Scroll knob. • Note: For ‘auto-searching’ next active station: a. Simply press the Scroll knob again. b. The unit will display the frequency changes until it stops on the next station c. After it runs to the end of the frequency range, it will continue it’s search from the beginning frequency. A. SCAN SETTING 1. Press BACK until the cursor points to , and then press to confirm. 2. Rotate the Scroll knob to your desired setting, and then press to confirm. Setting Station Presets Your radio can store 4 Internet station presets and 4 FM station presets respectively. To store the current station: Press and hold any one of the 1-4 button for 2 sec., and it will display ‘Preset stored’: Selecting a Preset station To select a stored station: 1. Enter corresponding mode 2. Simply press the corresponding preset button. Then radio will load that station immediately. • Note: Do not hold the button of a stored station down -if you do so, the currently playing station will overwrite the stored one in the preset. How to change the Station Information • It is possible to view the information that is displayed on the second line of the display when listening to a program. To view this information, press the INFO button repeatedly. • In , this function is out of service. AUX IN Operation Mode Operation Mode 1. To listen to an external audio source, press the MODE button repeatedly until appears in the display. Or enter , and then rotate the Scroll knob to , and press to confirm. 2. Connect one end of the audio cable to the headphone (or auxiliary out) socket of your source device, and the other end to AUX IN socket on the rear of your radio. The radio will display the following: 3. To gain optimal volume levels, adjust the output volume level on both the source device and radio itself . Your radio is now a high quality digital audio speaker system. • Note: AUX IN enables quick and easy connection to an MP3 player or other external sound sources. General Operations Setting the Clock 1. At subdirectory, rotate the Scroll knob to , and press to confirm. 2. Rotate the Scroll knob to
)
