Votos - 4, Puntuación media: 3.8 ( )

Fabricar: Blaupunkt Tamaño del archivo: 1.21 mb Nombre del archivo: Idioma del manual:

. Adjust the viewing angle with the key, 7. . Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Adjusting the display brightness If your car radio has been connected as described in the fitting instructions, the display brightness will switch with the headlights. The display brightness can be set at separate levels for day and night in steps from 1 to 9. Daytime display brightness . Press the MENU button, 8. . Press the or button, 7, as often as is necessary for “DIM DAY” to appear in the display. . Adjust the brightness with the key, 7. . Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. Night-time display brightness . Press the MENU button, 8. . Press the or button, 7, as often as is necessary for “DIM NGHT” to appear in the display. . Adjust the brightness with the key, 7. . Press the OK button, 5 or the MENU button, 8, to leave the menu. The settings are then saved. ENGLISH 39 RADIO OPERATION Radio Operation This device is equipped with an RDS radio receiver. Many of the FM stations that can be received transmit a signal in addition to the program itself that contains information such as the name of the station and the type of program (PTY). As soon as it can be received, the name of the station is shown in the display . If desired, the program type can be displayed. You may read more about this in the section on “Program Type (PTY)”. Switching on radio operation If the radio is in one of the other operating modes . Press the TUNE button, >. RDS convenience function (AF, REG) The RDS convenience functions AF (alternative frequency) and REG (regional) extend the capabilities of your radio (only in FM radio operation). . AF: If the RDS convenience function has been activated, the device searches automatically in the background for the best frequency on which the set station can be received. . REG: Some stations divide their programs at certain times into regional programs with different content. The REG function prevents the car radio from switching to alternative frequencies that have a different regional program content. Note: REG must be separately activated or deactivated in the radio function menu. Switching the RDS convenience function on and off In order to use the RDS convenience functions AF and REG . press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. . Press the softkey, 4, indicating “RDS”. The RDS convenience functions are active if “RDS” is displayed with light and shade reversed. “REG ON” or “REG OFF” is displayed briefly when the RDS convenience functions are switched on or off. To return to the basic radio menu . press the TUNE button, >, or wait for eight seconds. The settings are then saved. Switching REG on and off In order to use the RDS convenience function REG . press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. . Press the softkey, 4, indicating “REG”. “REG ON” or “REG OFF” is displayed briefly when the REG function is switched on or off. To return to the basic radio menu . press the TUNE button, >, or wait for eight seconds. The settings are then saved. RADIO OPERATION Select waveband/memory level This radio receives stations in the VHF (FM) waveband as well as MW and LW (AM) stations. Three memory levels are available for the FM waveband, and one memory level is available for each of the MW and LW bands. Six stations can be stored on each memory level. Selecting the FM memory level In order to switch between the FM memory levels . press the softkey, 4, indicating “NEXT” as often as necessary for the desired memory level to be shown in the display. The memory levels are called up in the sequence FM I, FM II and FMT. Selecting the waveband In order to select one of the FM, MW or LW bands . press the TUNE button, >, when the radio is operating. The radio function menu is shown on the display. . Press the softkey, 4, indicating “BND” as often as necessary for the desired waveband to be shown in the display. To return to the basic radio menu . Press the TUNE button, >, or wait for eight seconds. The settings are then saved. Setting the station There are a number of ways to set the station. Automatic station search . Press the or button, 7. The next station that can be received is tuned in. Manual station tuning You can also tune to the station manually. . Press the or button, 7. Note: Manual station tuning is only possible if the RDS convenience function is deactivated. Browsing a chain of stations (FM only) If a station is providing several programs it is possible to browse through this “chain” of stations. . Press the or button, 7, in order to change to the next link in the station chain. Note: In order to use this function, the RDS con venience function must be active. You can only change in this way to a station that you have already received once. To do this, use the Scan or Travelstore fun...

Descargar ahora

Introduzca dos números de la imagen: